bindings/gpio/ti%2Comap-gpio.yaml

1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/gpio/ti,omap-gpio.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Grygorii Strashko <grygorii.strashko@ti.com>
13   The general-purpose interface combines general-purpose input/output (GPIO) banks.
14   Each GPIO banks provides up to 32 dedicated general-purpose pins with input
15   and output capabilities; interrupt generation in active mode and wake-up
21       - enum:
22           - ti,omap2-gpio
23           - ti,omap3-gpio
24           - ti,omap4-gpio
25       - items:
26           - const: ti,am4372-gpio
27           - const: ti,omap4-gpio
32   gpio-controller: true
34   '#gpio-cells':
37   interrupt-controller: true
39   '#interrupt-cells':
45   gpio-ranges: true
47   gpio-line-names:
51   ti,gpio-always-on:
60       Name of the hwmod associated with the GPIO. Needed on some legacy OMAP
63   ti,no-reset-on-init:
67       Do not reset on init. Used with ti,hwmods on some legacy OMAP SoCs which
71   "^(.+-hog(-[0-9]+)?)$":
75       - gpio-hog
78   - compatible
79   - reg
80   - gpio-controller
81   - "#gpio-cells"
82   - interrupt-controller
83   - "#interrupt-cells"
84   - interrupts
89   - |
90     #include <dt-bindings/gpio/gpio.h>
93         compatible = "ti,omap4-gpio";
95         gpio-controller;
96         #gpio-cells = <2>;
97         interrupt-controller;
98         #interrupt-cells = <2>;
100         ti,gpio-always-on;
102         ls-buf-en-hog {
103             gpio-hog;
105             output-high;
106             line-name = "LS_BUF_EN";