bindings/dma/lpc1850-dmamux.txt

4 - compatible:	"nxp,lpc1850-dmamux"
5 - reg:		Memory map for accessing module
6 - #dma-cells:	Should be set to <3>.
8 		* 2nd cell contain the mux value (0-3) for the peripheral
11 - dma-requests:	Number of DMA requests for the mux
12 - dma-masters:	phandle pointing to the DMA controller
15 - dma-requests:	Number of DMA requests the controller can handle
20 	compatible = "nxp,lpc1850-gpdma", "arm,pl080", "arm,primecell";
21 	arm,primecell-periphid = <0x00041080>;
25 	clock-names = "apb_pclk";
26 	#dma-cells = <2>;
27 	dma-channels = <8>;
28 	dma-requests = <16>;
29 	lli-bus-interface-ahb1;
30 	lli-bus-interface-ahb2;
31 	mem-bus-interface-ahb1;
32 	mem-bus-interface-ahb2;
33 	memcpy-burst-size = <256>;
34 	memcpy-bus-width = <32>;
37 dmamux: dma-mux {
38 	compatible = "nxp,lpc1850-dmamux";
39 	#dma-cells = <3>;
40 	dma-requests = <64>;
41 	dma-masters = <&dmac>;
45 	compatible = "nxp,lpc1850-uart", "ns16550a";
47 	reg-shift = <2>;
50 	clock-names = "uartclk", "reg";
53 	dma-names = "tx", "rx";