bindings/dma/intel%2Cldma.yaml

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - chuanhua.lei@intel.com
11   - mallikarjunax.reddy@intel.com
14   - $ref: dma-controller.yaml#
19       - intel,lgm-cdma
20       - intel,lgm-dma2tx
21       - intel,lgm-dma1rx
22       - intel,lgm-dma1tx
23       - intel,lgm-dma0tx
24       - intel,lgm-dma3
25       - intel,lgm-toe-dma30
26       - intel,lgm-toe-dma31
31   "#dma-cells":
36       The third cell is the burst length of the channel.
38   dma-channels:
42   dma-channel-mask:
51   reset-names:
53       - const: ctrl
58   intel,dma-poll-cnt:
64   intel,dma-byte-en:
67       DMA byte enable is only valid for DMA write(RX).
69       instead of the whole burst.
71   intel,dma-drb:
76   intel,dma-dburst-wr:
79       Enable RX dynamic burst write. When it is enabled, the DMA does RX dynamic burst;
80       if it is disabled, the DMA RX will still support programmable fixed burst size of 2,4,8,16.
81       It only applies to RX DMA and memcopy DMA.
84   - compatible
85   - reg
90   - |
91     dma0: dma-controller@e0e00000 {
92       compatible = "intel,lgm-cdma";
94       #dma-cells = <3>;
95       dma-channels = <16>;
96       dma-channel-mask = <0xFFFF>;
97       interrupt-parent = <&ioapic1>;
100       reset-names = "ctrl";
102       intel,dma-poll-cnt = <4>;
103       intel,dma-byte-en;
104       intel,dma-drb;
106   - |
107     dma3: dma-controller@ec800000 {
108       compatible = "intel,lgm-dma3";
112       #dma-cells = <3>;
113       intel,dma-poll-cnt = <16>;
114       intel,dma-byte-en;
115       intel,dma-dburst-wr;