bindings/display/truly%2Cnt35597.txt

7 - compatible: should be "truly,nt35597-2K-display"
8 - vdda-supply: phandle of the regulator that provides the supply voltage
10 - vdispp-supply: phandle of the regulator that provides the supply voltage
12 - vdispn-supply: phandle of the regulator that provides the supply voltage
14 - reset-gpios: phandle of gpio for reset line
15   This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
17 - mode-gpios: phandle of the gpio for choosing the mode of the display
18   for single DSI or Dual DSI
19   This should be low for dual DSI and high for single DSI mode
20 - ports: This device has two video ports driven by two DSIs. Their connections
23   - port@0: DSI input port driven by master DSI
24   - port@1: DSI input port driven by secondary DSI
30 			compatible = "truly,nt35597-2K-display";
32 			vdda-supply = <&pm8998_l14>;
33 			vdispp-supply = <&lab_regulator>;
34 			vdispn-supply = <&ibb_regulator>;
35 			pinctrl-names = "default", "suspend";
36 			pinctrl-0 = <&dpu_dsi_active>;
37 			pinctrl-1 = <&dpu_dsi_suspend>;
39 			reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
40 			mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
42 				#address-cells = <1>;
43 				#size-cells = <0>;
47 						remote-endpoint = <&dsi0_out>;
54 						remote-endpoint = <&dsi1_out>;