display/panel/samsung%2Cs6d27a1.yaml

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
13   - Markuss Broks <markuss.broks@gmail.com>
16   - $ref: panel-common.yaml#
17   - $ref: /schemas/spi/spi-peripheral-props.yaml#
33   reset-gpios: true
35   vci-supply:
36     description: regulator that supplies the VCI analog voltage
39   vccio-supply:
45   spi-cpha: true
47   spi-cpol: true
49   spi-max-frequency:
55   - compatible
56   - reg
57   - vci-supply
58   - vccio-supply
59   - spi-cpha
60   - spi-cpol
61   - port
66   - |
67     #include <dt-bindings/gpio/gpio.h>
68     #include <dt-bindings/interrupt-controller/irq.h>
71         compatible = "spi-gpio";
72         sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
73         miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
74         mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
75         cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
76         num-chipselects = <1>;
77         #address-cells = <1>;
78         #size-cells = <0>;
81             spi-max-frequency = <1200000>;
82             spi-cpha;
83             spi-cpol;
85             vci-supply = <&lcd_3v0_reg>;
86             vccio-supply = <&lcd_1v8_reg>;
87             reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
88             interrupt-parent = <&gpio>;
93                     remote-endpoint = <&display_out>;