display/panel/jdi%2Clpm102a188a.yaml

1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
13   This panel requires a dual-channel DSI host to operate. It supports two modes:
14   - left-right: each channel drives the left or right half of the screen
15   - even-odd: each channel drives the even or odd lines of the screen
18   driven by the first link (DSI-LINK1) is considered the primary peripheral
20   peripheral driven by the second link (DSI-LINK2).
23   - $ref: panel-common.yaml#
32   enable-gpios: true
33   reset-gpios: true
34   power-supply: true
37   ddi-supply:
44       presence of this property marks the containing node as DSI-LINK1.
47   - compatible
48   - reg
52     - link2
55     - power-supply
56     - ddi-supply
57     - enable-gpios
58     - reset-gpios
63   - |
64     #include <dt-bindings/gpio/gpio.h>
65     #include <dt-bindings/gpio/tegra-gpio.h>
68         #address-cells = <1>;
69         #size-cells = <0>;
79         #address-cells = <1>;
80         #size-cells = <0>;
82         nvidia,ganged-mode = <&dsia>;
87             power-supply = <&pplcd_vdd>;
88             ddi-supply = <&pp1800_lcdio>;
89             enable-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
90             reset-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;