display/msm/qcom%2Csm7150-dpu.yaml

1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/display/msm/qcom,sm7150-dpu.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Danila Tikhonov <danila@jiaxyga.com>
12 $ref: /schemas/display/msm/dpu-common.yaml#
16     const: qcom,sm7150-dpu
20       - description: Address offset and size for mdp register set
21       - description: Address offset and size for vbif register set
23   reg-names:
25       - const: mdp
26       - const: vbif
30       - description: Display hf axi clock
31       - description: Display ahb clock
32       - description: Display rotator clock
33       - description: Display lut clock
34       - description: Display core clock
35       - description: Display vsync clock
37   clock-names:
39       - const: bus
40       - const: iface
41       - const: rot
42       - const: lut
43       - const: core
44       - const: vsync
47   - compatible
48   - reg
49   - reg-names
50   - clocks
51   - clock-names
56   - |
57     #include <dt-bindings/interrupt-controller/arm-gic.h>
58     #include <dt-bindings/power/qcom,rpmhpd.h>
60     display-controller@ae01000 {
61         compatible = "qcom,sm7150-dpu";
64         reg-names = "mdp", "vbif";
72         clock-names = "bus",
79         assigned-clocks = <&dispcc_mdss_vsync_clk>;
80         assigned-clock-rates = <19200000>;
82         operating-points-v2 = <&mdp_opp_table>;
83         power-domains = <&rpmhpd RPMHPD_CX>;
85         interrupt-parent = <&mdss>;
89             #address-cells = <1>;
90             #size-cells = <0>;
95                     remote-endpoint = <&mdss_dsi0_in>;
102                     remote-endpoint = <&mdss_dsi1_in>;
109                     remote-endpoint = <&dp_in>;
114         mdp_opp_table: opp-table {
115             compatible = "operating-points-v2";
117             opp-19200000 {
118                 opp-hz = /bits/ 64 <19200000>;
119                 required-opps = <&rpmhpd_opp_min_svs>;
122             opp-200000000 {
123                 opp-hz = /bits/ 64 <200000000>;
124                 required-opps = <&rpmhpd_opp_low_svs>;
127             opp-300000000 {
128                 opp-hz = /bits/ 64 <300000000>;
129                 required-opps = <&rpmhpd_opp_svs>;
132             opp-344000000 {
133                 opp-hz = /bits/ 64 <344000000>;
134                 required-opps = <&rpmhpd_opp_svs_l1>;
137             opp-430000000 {
138                 opp-hz = /bits/ 64 <430000000>;
139                 required-opps = <&rpmhpd_opp_nom>;