bindings/display/dsi-controller.yaml

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/display/dsi-controller.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Common Properties for DSI Display Panels
10   - Linus Walleij <linus.walleij@linaro.org>
13   This document defines device tree properties common to DSI, Display
25   channel should have a node "panel" for their virtual channel with their
26   reg-property set to the virtual channel number, usually there is just
27   one virtual channel, number 0.
33   clock-master:
42   "#address-cells":
45   "#size-cells":
49   "^panel@[0-3]$":
58           The virtual channel number of a DSI peripheral. Must be in the range
59           from 0 to 3, as DSI uses a 2-bit addressing scheme. Some DSI
60           peripherals respond to more than a single virtual channel. In that
62           channel that the peripheral responds to.
64       enforce-video-mode:
67           The best option is usually to run a panel in command mode, as this
70           useful to be able to force a command mode-capable panel into video
71           mode.
74       - reg
79   - |
80     #include <dt-bindings/gpio/gpio.h>
83         #address-cells = <1>;
84         #size-cells = <0>;
88             vddi-supply = <&ab8500_ldo_aux1_reg>;
89             reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;