display/bridge/thine%2Cthc63lvd1024.yaml

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Jacopo Mondi <jacopo+renesas@jmondi.org>
11   - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
15   streams to parallel data outputs. The chip supports single/dual input/output
19   Single or dual operation mode, output data mapping and DDR output modes are
20   configured through input signals and the chip does not expose any control
30       The device can operate in single or dual input and output modes.
32       When operating in single input mode, all pixels are received on port@0,
34       even-numbered pixels are received on port@0 and odd-numbered pixels on
37       When operating in single output mode all pixels are output from the first
60       - port@0
61       - port@2
63   oe-gpios:
67   powerdown-gpios:
71   vcc-supply:
77   - compatible
78   - ports
79   - vcc-supply
84   - |
85     #include <dt-bindings/gpio/gpio.h>
87     lvds-decoder {
90         vcc-supply = <&reg_lvds_vcc>;
91         powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
94             #address-cells = <1>;
95             #size-cells = <0>;
101                     remote-endpoint = <&lvds_out>;
109                     remote-endpoint = <&adv7511_in>;