display/bridge/cdns%2Cdsi.yaml

1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/display/bridge/cdns,dsi.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Cadence DSI bridge
10   - Boris Brezillon <boris.brezillon@bootlin.com>
13    CDNS DSI is a bridge device which converts DPI to DSI
18       - cdns,dsi
19       - ti,j721e-dsi
24       - description:
26       - description:
31       - description: PSM clock, used by the IP
32       - description: sys clock, used by the IP
34   clock-names:
36       - const: dsi_p_clk
37       - const: dsi_sys_clk
42   phy-names:
51   reset-names:
61           Output port representing the DSI output. It can have
63           the DSI virtual channel used by this device.
71       - port@1
74   - $ref: ../dsi-controller.yaml#
76   - if:
80             const: ti,j721e-dsi
86         power-domains:
94   - compatible
95   - reg
96   - interrupts
97   - clocks
98   - clock-names
99   - phys
100   - phy-names
101   - ports
106   - |
108         #address-cells = <2>;
109         #size-cells = <2>;
111         dsi@fd0c0000 {
112             compatible = "cdns,dsi";
114             clocks = <&pclk>, <&sysclk>;
115             clock-names = "dsi_p_clk", "dsi_sys_clk";
118             phy-names = "dphy";
120             #address-cells = <1>;
121             #size-cells = <0>;
124                 #address-cells = <1>;
125                 #size-cells = <0>;
130                         remote-endpoint = <&xxx_dpi_output>;
138                 power-supply = <&vcc_lcd_reg>;
143   - |
145         #address-cells = <2>;
146         #size-cells = <2>;
148         dsi@fd0c0000 {
149             compatible = "cdns,dsi";
151             clocks = <&pclk>, <&sysclk>;
152             clock-names = "dsi_p_clk", "dsi_sys_clk";
155             phy-names = "dphy";
158                 #address-cells = <1>;
159                 #size-cells = <0>;
163                     #address-cells = <1>;
164                     #size-cells = <0>;
168                         remote-endpoint = <&dsi_panel_input>;
175                         remote-endpoint = <&xxx_dpi_output>;