Lines Matching full:sink
76 - sink
85 - sink
121 sink-vdos:
133 sink-vdos-v1:
215 is applied during PD3.0 Fast Role Swap. "Table 6-14 Fixed Supply PDO - Sink"
218 provides a detailed description of the field. The sink PDO from current source
220 requirement during fr swap. The current sink (i.e. receiver of the FRS signal),
222 new sink's, requirement during frswap before enabling the frs signal reception.
223 This property refers to maximum current capability that the current sink can
226 "1" refers to default USB power level as described by "Table 6-14 Fixed Supply PDO - Sink".
234 still comply to pSnkStby i.e Maximum power that can be consumed by sink while in Sink Standby
235 state as defined in 7.4.2 Sink Electrical Parameters of USB Power Delivery Specification
257 sink-vdos-v1: [ sink-vdos ]
258 sink-vdos: [ sink-vdos-v1 ]
280 sink-pdos:
281 description: An array of u32 with each entry providing supported power sink
284 Sink Capabilities Message, the order of each entry(PDO) should follow the
285 PD spec chapter 6.4.1. Required for power sink and power dual role. User
286 can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
292 op-sink-microwatt:
293 description: Sink required operating power in microwatt, if source can't
294 offer the power, Capability Mismatch is set. Required for power sink and
391 try-power-role = "sink";
393 sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
395 op-sink-microwatt = <10000000>;