clock/ti/mux.txt

4 register-mapped multiplexer with multiple input clock signals or
21 into the register, instead indexing begins at 1.  The optional property
22 "index-starts-at-one" modified the scheme as follows:
34 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
37 - compatible : shall be "ti,mux-clock" or "ti,composite-mux-clock".
38 - #clock-cells : from common clock binding; shall be set to 0.
39 - clocks : link phandles of parent clocks
40 - reg : register offset for register controlling adjustable mux
43 - clock-output-names : from common clock binding.
44 - ti,bit-shift : number of bits to shift the bit-mask, defaults to
46 - ti,index-starts-at-one : valid input select programming starts at 1, not
48 - ti,set-rate-parent : clk_set_rate is propagated to parent clock,
49   not supported by the composite-mux-clock subtype
50 - ti,latch-bit : latch the mux value to HW, only needed if the register
57 	#clock-cells = <0>;
58 	compatible = "ti,mux-clock";
61 	ti,index-starts-at-one;
65 	#clock-cells = <0>;
66 	compatible = "ti,mux-clock";
68 	ti,bit-shift = <24>;
73 	#clock-cells = <0>;
74 	compatible = "ti,composite-mux-clock";
76 	ti,bit-shift = <4>;