bindings/clock/maxim%2Cmax77686.txt

1 Binding for Maxim MAX77686/MAX77802/MAX77620 32k clock generator block
3 This is a part of device tree bindings of MAX77686/MAX77802/MAX77620
4 multi-function device. More information can be found in MFD DT binding
6 	bindings/mfd/max77686.txt for MAX77686 and
7 	bindings/mfd/max77802.txt for MAX77802 and
8 	bindings/mfd/max77620.txt for MAX77620.
10 The MAX77686 contains three 32.768khz clock outputs that can be controlled
12 dt-bindings/clock/maxim,max77686.h.
15 The MAX77802 contains two 32.768khz clock outputs that can be controlled
17 dt-bindings/clock/maxim,max77802.h.
19 The MAX77686 contains one 32.768khz clock outputs that can be controlled
21 dt-bindings/clock/maxim,max77620.h.
27 - #clock-cells: from common clock binding; shall be set to 1.
30 - clock-output-names: From common clock binding.
32 Each clock is assigned an identifier and client nodes can use this identifier
33 to specify the clock which they consume. Following indices are allowed:
34     - 0: 32khz_ap clock (max77686, max77802), 32khz_out0 (max77620)
35     - 1: 32khz_cp clock (max77686, max77802),
36     - 2: 32khz_pmic clock (max77686).
38 Clocks are defined as preprocessor macros in above dt-binding header for
45 #include <dt-bindings/clock/maxim,max77686.h>
51 			interrupt-parent = <&wakeup_eint>;
54 			#clock-cells = <1>;
59 	Clock consumer node
64 			clock-names = "my-clock";
70 #include <dt-bindings/clock/maxim,max77802.h>
76 			interrupt-parent = <&wakeup_eint>;
79 			#clock-cells = <1>;
84 	Clock consumer node
89 			clock-names = "my-clock";
96 #include <dt-bindings/clock/maxim,max77620.h>
103 			#clock-cells = <1>;
107 	Clock consumer node
112 			clock-names = "my-clock";