bindings/clock/hisi-crg.txt

1 * HiSilicon Clock and Reset Generator(CRG)
3 The CRG module provides clock and reset signals to various
6 This binding uses the following bindings:
7     Documentation/devicetree/bindings/clock/clock-bindings.txt
8     Documentation/devicetree/bindings/reset/reset.txt
12 - compatible: should be one of the following.
13   - "hisilicon,hi3516cv300-crg"
14   - "hisilicon,hi3516cv300-sysctrl"
15   - "hisilicon,hi3519-crg"
16   - "hisilicon,hi3798cv200-crg"
17   - "hisilicon,hi3798cv200-sysctrl"
19 - reg: physical base address of the controller and length of memory mapped
22 - #clock-cells: should be 1.
24 Each clock is assigned an identifier and client nodes use this identifier
25 to specify the clock which they consume.
27 All these identifier could be found in <dt-bindings/clock/hi3519-clock.h>.
29 - #reset-cells: should be 2.
37 CRG: clock-reset-controller@12010000 {
38 	compatible = "hisilicon,hi3519-crg";
40 	#clock-cells = <1>;
41 	#reset-cells = <2>;
46 	compatible = "hisilicon,hi3519-i2c";