Lines Matching full:crossbar

5 In such places a interrupt controllers are preceded by an CROSSBAR
10 - compatible : Should be "ti,irq-crossbar"
11 - reg: Base address and the size of the crossbar registers.
14 - ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
18 		 crossbar. These interrupt lines are reserved in the soc,
19 		 so crossbar bar driver should not consider them as free
25   crossbar. These irqs have a crossbar register, but still cannot be used.
31 		crossbar_mpu: crossbar@4a002a48 {
32 			compatible = "ti,irq-crossbar";
35 			ti,max-crossbar-sources = <400>;
47 An interrupt consumer on an SoC using crossbar will use:
52 		/* Crossbar 8 used */