arch/m68k/kernel-options.rst

13 0) Introduction
76   /dev/ram: -> 0x0100 (initial ramdisk)
77   /dev/hda: -> 0x0300 (first IDE disk)
78   /dev/hdb: -> 0x0340 (second IDE disk)
79   /dev/sda: -> 0x0800 (first SCSI disk)
80   /dev/sdb: -> 0x0810 (second SCSI disk)
81   /dev/sdc: -> 0x0820 (third SCSI disk)
82   /dev/sdd: -> 0x0830 (forth SCSI disk)
83   /dev/sde: -> 0x0840 (fifth SCSI disk)
84   /dev/fd : -> 0x0200 (floppy disk)
107 to /dev/fd0D720 as an abbreviation for floppy driver #0 in DD format,
127 SCSI CD-ROM drive, you boot from it by "root=0b00". Here, hex "0b" =
128 decimal 11 is the major of SCSI CD-ROMs, and the minor 0 stands for
183 messages of level 0 (panic messages) and all messages printed while
310 (maximum 10, default 0). For example with 3% you can play 8000Hz
400 by setting <n> to 0.
465       normal colors, i.e. 0=white, 1=black
467       inverted colors, i.e. 0=black, 1=white
471 as a hexadecimal number with a "0x" prefix. You have to find out this
493 uses the addresses vgabase+0x3c7...vgabase+0x3c9. The <vgabase>
494 parameter is written in hexadecimal with a "0x" prefix, just as
577    The drive type may be 0, 1, or 2, for DD, HD, and ED, resp. This
584    track buffering (1) or not (0). The default is machine-dependent:
634     Legal values are between 0 and 255. Default: 255/0. Note: This
635     value is forced to 0 on a Falcon, since scatter-gather isn't
649     0 means turn off tagged queuing support, all other values > 0 mean
731  - pal             : 640x256, 15 kHz, 50 Hz
748  - dblpal          : 640x256, 27 kHz, 47 Hz doublescan
802 hexadecimal with "0x" prefix.
825 "wd33c93=nosync:0xff". The default is to disable sync negotiation for
826 all devices, eg. nosync:0xff.
841 Specify x = 0 to never allow disconnects, 2 to always allow them.
881 using DMA to chip memory.  The default is 0, i.e. to use DMA if
911 24 bit region which is specified by a mask of 0x00fffffe.