Lines Matching full:using
50 This can be established using the following kernel command line parameters:
97 this means that the kernel tries to configure everything using
107 Default: Determined using autoconfiguration.
121 Default: Determined using autoconfiguration.
125 Default: Determined using autoconfiguration.
131 Default: Determined using autoconfiguration.
146 Otherwise the device is determined using
149 and using the device that received the first reply.
154 requests are sent using all protocols, and the first one
180 Default: None if not using autoconfiguration; determined
181 automatically if using autoconfiguration.
190 Default: None if not using autoconfiguration; determined
191 automatically if using autoconfiguration.
252 - Booting from a floppy using syslinux
271 a floppy using dd, configure the boot device using rdev, and
272 boot using the resulting floppy. Linux no longer supports this
275 - Booting from a cdrom using isolinux
287 This can be written to a cdrom using a variety of tools including
297 - Using LILO
299 When using LILO all the necessary command line parameters may be
300 specified using the 'append=' directive in the LILO configuration
312 - Using GRUB
314 When using GRUB, kernel parameter are simply appended after the kernel
317 - Using loadlin
327 - Using a boot ROM
330 With a boot ROM the kernel is loaded using the TFTP protocol. The
337 - Using pxelinux
339 Pxelinux may be used to boot linux using the PXE boot loader
342 When using pxelinux, the kernel image is specified using