admin-guide/media/vivid.rst

11 Up to 64 vivid instances can be created, each with up to 16 inputs and 16 outputs.
17 These inputs and outputs act exactly as a real hardware device would behave. This
48 device with webcam, TV, S-Video and HDMI inputs, a video output device with
52 The number of instances, devices, video inputs and outputs and their types are
88 	the number of inputs, one for each instance. By default 4 inputs
89 	are created for each video capture device. At most 16 inputs can be created,
95 	what the type of each input is when the inputs are created for each driver
105 	So to create a video capture device with 8 inputs where input 0 is a TV
106 	tuner, inputs 1-3 are S-Video inputs and inputs 4-7 are HDMI inputs you
226 	Note that this value is ignored by webcam inputs: those enumerate
326 but by default four inputs are configured: a webcam, a TV tuner, an S-Video
352 TV and S-Video Inputs
358 These inputs support audio inputs as well: one TV and one Line-In. They
363 These inputs support all combinations of the field setting. Special care has
404 Finally, for these inputs the v4l2_timecode struct is filled in the
411 The HDMI inputs supports all CEA-861 and DMT timings, both progressive and
431 For HDMI inputs it is possible to set the EDID. By default a simple EDID
432 is provided. You can only set the EDID for HDMI inputs. Internally, however,
433 the EDID is shared between all HDMI inputs.
438 There is a maximum of 15 HDMI inputs (if there are more, then they will be
501 The VBI device will only work for the S-Video and TV inputs, it will give
595 back an error for all other inputs.
643 brightness range (minimum and maximum control values). Switching inputs will
1150 The inputs and outputs are numbered XXX-N where XXX is the vivid instance number
1241 only applies to the TV/S-Video/HDMI inputs and outputs. The reason is that
1324 If there are HDMI inputs then a CEC adapter will be created that has
1326 has that number of inputs. Each HDMI output will also create a
1328 are more outputs than inputs) is not hooked up at all. In other words,
1335 containing physical address A.B.C.0 where C is 1 to the number of inputs. If
1336 there are more outputs than inputs then the remaining outputs have a CEC adapter