Lines Matching +full:0 +full:x6040
153 (output in hex format: 0xAAAABBCC), where:
211 events. If a key is "masked" (bit set to 0 in the mask), the firmware
240 echo 0xffffffff > /proc/acpi/ibm/hotkey -- enable all hot keys
241 echo 0 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
262 Returns 0.
269 to this value. This is always 0x80c, because those are
276 0: returns -EPERM
323 0 and 25 Hz. Polling is only carried out when strictly
337 attribute will read 0 if the switch is in the "radios
345 will read 0 if the ThinkPad is in normal mode, and
364 user's choice. Refer to HKEY events 0x4003 and
365 0x3003, below.
385 vendor 0x1014 (PCI_VENDOR_ID_IBM) or
386 0x17aa (PCI_VENDOR_ID_LENOVO)
387 product 0x5054 ("TP")
388 version 0x4101
392 backwards-compatible way. The MSB shall always be 0x41 for this input
393 device. If the MSB is not 0x41, do not use the device as described in
401 Thinkpad-acpi Hot Key event map (version 0x4101):
407 0x1001 0x00 FN+F1 -
409 0x1002 0x01 FN+F2 IBM: battery (rare)
412 0x1003 0x02 FN+F3 Many IBM models always report
420 0x1004 0x03 FN+F4 Sleep button (ACPI sleep button
431 0x1005 0x04 FN+F5 Radio. Enables/disables
440 0x1006 0x05 FN+F6 -
442 0x1007 0x06 FN+F7 Video output cycle.
445 0x1008 0x07 FN+F8 IBM: toggle screen expand
449 replaced by 0x131f (see below)
451 0x1009 0x08 FN+F9 -
455 0x100B 0x0A FN+F11 -
457 0x100C 0x0B FN+F12 Sleep to disk. You are always
467 0x100D 0x0C FN+BACKSPACE -
468 0x100E 0x0D FN+INSERT -
469 0x100F 0x0E FN+DELETE -
471 0x1010 0x0F FN+HOME Brightness up. This key is
480 0x1011 0x10 FN+END Brightness down. See brightness
483 0x1012 0x11 FN+PGUP ThinkLight toggle. This key is
487 0x1013 0x12 FN+PGDOWN -
489 0x1014 0x13 FN+SPACE Zoom key
491 0x1015 0x14 VOLUME UP Internal mixer volume up. This
496 0x1016 0x15 VOLUME DOWN Internal mixer volume up. This
501 0x1017 0x16 MUTE Mute internal mixer. This
505 0x1018 0x17 THINKPAD ThinkPad/Access IBM/Lenovo key
507 0x1019 0x18 unknown
509 0x131f ... FN+F8 Platform Mode change.
514 0x1020 0x1F unknown
535 SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A
544 0x2304 System is waking up from suspend to undock
545 0x2305 System is waking up from suspend to eject bay
546 0x2404 System is waking up from hibernation to undock
547 0x2405 System is waking up from hibernation to eject bay
548 0x5001 Lid closed
549 0x5002 Lid opened
550 0x5009 Tablet swivel: switched to tablet mode
551 0x500A Tablet swivel: switched to normal mode
552 0x5010 Brightness level changed/control event
553 0x6000 KEYBOARD: Numlock key pressed
554 0x6005 KEYBOARD: Fn key pressed (TO BE VERIFIED)
555 0x7000 Radio Switch may have changed state
562 0x2313 ALARM: System is waking up from suspend because
564 0x2413 ALARM: System is waking up from hibernation because
566 0x3003 Bay ejection (see 0x2x05) complete, can sleep again
567 0x3006 Bay hotplug request (hint to power up SATA link when
569 0x4003 Undocked (see 0x2x04), can sleep again
570 0x4010 Docked into hotplug port replicator (non-ACPI dock)
571 0x4011 Undocked from hotplug port replicator (non-ACPI dock)
572 0x500B Tablet pen inserted into its storage bay
573 0x500C Tablet pen removed from its storage bay
574 0x6011 ALARM: battery is too hot
575 0x6012 ALARM: battery is extremely hot
576 0x6021 ALARM: a sensor is too hot
577 0x6022 ALARM: a sensor is extremely hot
578 0x6030 System thermal table changed
579 0x6032 Thermal Control command set completion (DYTC, Windows)
580 0x6040 Nvidia Optimus/AC adapter related (TO BE VERIFIED)
581 0x60C0 X1 Yoga 2016, Tablet mode status changed
582 0x60F0 Thermal Transformation changed (GMTS, Windows)
586 operating system to hibernate or shutdown cleanly (0x2313), or shutdown
587 cleanly (0x2413) before power is lost. They must be acted upon, as the
648 - 0: disables Bluetooth / Bluetooth is disabled
751 real, but commands 0 to 2 don't control the mixer anymore (they have been
754 The range of valid cmos command numbers is 0 to 21, but not all have an
758 - 0 - Related to "Volume down" key press
808 The <LED number> range is 0 to 15. The set of LEDs that can be
812 - 0 - power
834 The LEDs are named (in LED ID order, from 0 to 12):
872 The valid <number> range is 0 to 17. Not all numbers trigger sounds
876 - 0 - stop a sound in progress (but use 17 to stop 16)
886 - 15 - three high-pitched beeps repeating constantly, stop with 0
1018 has eight brightness levels, ranging from 0 to 7. Some of the levels
1021 from 0 to 15.
1048 brightness_enable=0 forces it to be disabled. brightness_enable=1
1085 power management mode, where 0 is "display on", and 1 to 3
1086 will dim the display backlight to brightness level 0
1178 The <level> number range is 0 to 14 although not all of them may be
1231 Most ThinkPad fans work in "levels" at the firmware interface. Level 0
1292 Placing a fan on level 0 is the same as disabling it. Enabling a fan
1299 Where <level> is an integer from 0 to 7, or one of the words "auto" or
1321 If you want to disable the watchdog, use 0 as the interval.
1338 - 0: PWM offline (fan is set to full-speed mode)
1343 Modes 0 and 2 are not supported by all ThinkPads, and the
1348 Fan level, scaled from the firmware values of 0-7 to the hwmon
1349 scale of 0-255. 0 means fan stopped, 255 means highest normal
1364 not installed, will always read 0.
1368 1 second, maximum is 120 seconds. 0 disables the watchdog.
1411 - 0: disables WWAN card / WWAN card is disabled
1437 echo '0' >/proc/acpi/ibm/lcdshadow
1548 - 0 = Home mode
1567 accepts an integer between 0 and 99 (inclusive); this value represents a battery
1581 echo enable,0xffff > /proc/acpi/ibm/hotkey
1587 modprobe thinkpad_acpi hotkey=enable,0xffff video=auto_disable
1596 modprobe thinkpad_acpi debug=0xffff
1604 0x8000 Disclose PID of userspace programs
1606 0x0001 Initialization and probing
1607 0x0002 Removal
1608 0x0004 RF Transmitter control (RFKILL)
1610 0x0008 HKEY event interface, hotkeys
1611 0x0010 Fan control
1612 0x0020 Backlight brightness
1613 0x0040 Audio mixer/volume control
1636 0x000100: Initial sysfs support, as a single platform driver and
1638 0x000200: Hot key support for 32 hot keys, and radio slider switch
1640 0x010000: Hot keys are now handled by default over the input
1645 0x020000: ABI fix: added a separate hwmon platform device and
1651 0x020100: Marker for thinkpad-acpi with hot key NVRAM polling
1656 0x020101: Marker for thinkpad-acpi with hot key NVRAM polling
1662 0x020200: Add poll()/select() support to the following attributes:
1665 0x020300: hotkey enable/disable support removed, attributes
1669 0x020400: Marker for 16 LEDs support. Also, LEDs that are known
1673 0x020500: Updated hotkey driver, hotkey_mask is always available
1678 0x020600: Marker for backlight change event support.
1680 0x020700: Support for mute-only mixers.
1684 0x030000: Thermal and fan sysfs attributes were moved to the hwmon