Lines Matching +full:serial +full:- +full:number
1 0 Unnamed devices (e.g. non-device mounts)
2 0 = reserved as null device number
7 2 = /dev/kmem OBSOLETE - replaced by /proc/kcore
11 6 = /dev/core OBSOLETE - replaced by /proc/kcore
13 8 = /dev/random Nondeterministic random number gen.
14 9 = /dev/urandom Faster, less secure random number gen.
18 12 = /dev/oldmem OBSOLETE - replaced by /proc/vmcore
31 2 char Pseudo-TTY masters
37 Pseudo-tty's are named as follows:
40 the 1st through 16th series of 16 pseudo-ttys each, and
44 These are the old-style (BSD) PTY devices; Unix98
59 To specify format, add to the autodetect device number:
106 3 char Pseudo-TTY slaves
112 These are the old-style (BSD) PTY devices; Unix98
115 3 block First MFM, RLL and IDE hard disk/CD-ROM interface
116 0 = /dev/hda Master: whole disk (or CD-ROM)
117 64 = /dev/hdb Slave: whole disk (or CD-ROM)
119 For partitions, add to the whole disk device number:
126 For Linux/i386, partitions 1-4 are the primary
137 64 = /dev/ttyS0 First UART serial port
139 255 = /dev/ttyS191 192nd UART serial port
141 UART serial ports refer to 8250/16450/16550 series devices.
144 number for BSD PTY devices. As of Linux 2.1.115, this
149 because the root filesystem is mounted read-only.
200 8 block SCSI disk devices (0-15)
208 disks (see major number 3) except that the limit on
250 10 char Non-serial mice, misc features
252 1 = /dev/psaux PS/2-style mouse port
255 4 = /dev/jbm J-mouse
260 8 = /dev/smouse Simple serial mouse driver
261 9 = /dev/pc110pad IBM PC-110 digitizer pad
278 141 = /dev/relay16 Berkshire Products ISO-16 relay card
281 144 = /dev/nvram Non-volatile configuration RAM
298 161 = /dev/userdma User-space DMA access
304 167 = /dev/specialix_sxctl Specialix serial control
305 168 = /dev/tcldrv Technology Concepts serial control
306 169 = /dev/specialix_rioctl Specialix RIO serial control
314 177 = /dev/cbm Serial CBM bus
316 179 = /dev/xsvc High-speed shared-mem/semaphore service
319 182 = /dev/perfctr Performance-monitoring counters
320 183 = /dev/hwrng Generic random number generator
325 189 = /dev/ussp_ctl User space serial port control
329 193 = /dev/d7s SPARC 7-segment display
330 194 = /dev/zkshim Zero-Knowledge network shim control
331 195 = /dev/elographics/e2201 Elographics touchscreen E271-2201
333 197 = /dev/pxa3xx-gcu PXA3xx graphics controller unit driver
337 201 = /dev/button/gulpb Transmeta GULP-B buttons
339 203 = /dev/cuse Cuse (character device in user-space)
354 218 = /dev/kchuid Inter-process chuid control
365 229 = /dev/fuse Fuse (virtual filesystem in user-space)
368 232 = /dev/kvm Kernel-based virtual machine (hardware virtualization extensions)
369 233 = /dev/kmview View-OS A process with a view
370 234 = /dev/btrfs-control Btrfs control device
372 236 = /dev/mapper/control Device-Mapper control device
373 237 = /dev/loop-control Loopback control device
374 238 = /dev/vhost-net Host kernel accelerator for virtio net
375 239 = /dev/uhid User-space I/O driver support for HID subsystem
377 241 = /dev/vhost-vsock Host kernel driver for virtio vsock
380 243-254 Reserved for local use
386 11 char Serial Mux device (Linux/PA-RISC only)
391 11 block SCSI CD-ROM devices
392 0 = /dev/scd0 First SCSI CD-ROM
393 1 = /dev/scd1 Second SCSI CD-ROM
398 12 char QIC-02 tape
399 2 = /dev/ntpqic11 QIC-11, no rewind-on-close
400 3 = /dev/tpqic11 QIC-11, rewind-on-close
401 4 = /dev/ntpqic24 QIC-24, no rewind-on-close
402 5 = /dev/tpqic24 QIC-24, rewind-on-close
403 6 = /dev/ntpqic120 QIC-120, no rewind-on-close
404 7 = /dev/tpqic120 QIC-120, rewind-on-close
405 8 = /dev/ntpqic150 QIC-150, no rewind-on-close
406 9 = /dev/tpqic150 QIC-150, rewind-on-close
408 The device names specified are proposed -- if there
435 4 = /dev/audio Sun-compatible digital audio
438 8 = /dev/sequencer2 Sequencer -- alternate device
457 15 block Sony CDU-31A/CDU-33A CD-ROM
458 0 = /dev/sonycd Sony CDU-31a CD-ROM
460 16 char Non-SCSI scanners
463 16 block GoldStar CD-ROM
464 0 = /dev/gscd GoldStar CD-ROM
466 17 char OBSOLETE (was Chase serial card)
470 17 block Optics Storage CD-ROM
471 0 = /dev/optcd Optics Storage CD-ROM
473 18 char OBSOLETE (was Chase serial card - alternate devices)
477 18 block Sanyo CD-ROM
478 0 = /dev/sjcd Sanyo CD-ROM
491 20 block Hitachi CD-ROM (under development)
492 0 = /dev/hitcd Hitachi CD-ROM
502 device-naming practice.
508 This device is used on the ARM-based Acorn RiscPC.
510 (see major number 3).
512 22 char Digiboard serial card
516 22 block Second IDE hard disk/CD-ROM interface
517 0 = /dev/hdc Master: whole disk (or CD-ROM)
518 64 = /dev/hdd Slave: whole disk (or CD-ROM)
521 interface (see major number 3).
523 23 char Digiboard serial card - alternate devices
527 23 block Mitsumi proprietary CD-ROM
528 0 = /dev/mcd Mitsumi CD-ROM
530 24 char Stallion serial card
543 24 block Sony CDU-535 CD-ROM
544 0 = /dev/cdu535 Sony CDU-535 CD-ROM
546 25 char Stallion serial card - alternate devices
559 25 block First Matsushita (Panasonic/SoundBlaster) CD-ROM
560 0 = /dev/sbpcd0 Panasonic CD-ROM controller 0 unit 0
561 1 = /dev/sbpcd1 Panasonic CD-ROM controller 0 unit 1
562 2 = /dev/sbpcd2 Panasonic CD-ROM controller 0 unit 2
563 3 = /dev/sbpcd3 Panasonic CD-ROM controller 0 unit 3
567 26 block Second Matsushita (Panasonic/SoundBlaster) CD-ROM
568 0 = /dev/sbpcd4 Panasonic CD-ROM controller 1 unit 0
569 1 = /dev/sbpcd5 Panasonic CD-ROM controller 1 unit 1
570 2 = /dev/sbpcd6 Panasonic CD-ROM controller 1 unit 2
571 3 = /dev/sbpcd7 Panasonic CD-ROM controller 1 unit 3
573 27 char QIC-117 tape
574 0 = /dev/qft0 Unit 0, rewind-on-close
575 1 = /dev/qft1 Unit 1, rewind-on-close
576 2 = /dev/qft2 Unit 2, rewind-on-close
577 3 = /dev/qft3 Unit 3, rewind-on-close
578 4 = /dev/nqft0 Unit 0, no rewind-on-close
579 5 = /dev/nqft1 Unit 1, no rewind-on-close
580 6 = /dev/nqft2 Unit 2, no rewind-on-close
581 7 = /dev/nqft3 Unit 3, no rewind-on-close
582 16 = /dev/zqft0 Unit 0, rewind-on-close, compression
583 17 = /dev/zqft1 Unit 1, rewind-on-close, compression
584 18 = /dev/zqft2 Unit 2, rewind-on-close, compression
585 19 = /dev/zqft3 Unit 3, rewind-on-close, compression
586 20 = /dev/nzqft0 Unit 0, no rewind-on-close, compression
587 21 = /dev/nzqft1 Unit 1, no rewind-on-close, compression
588 22 = /dev/nzqft2 Unit 2, no rewind-on-close, compression
589 23 = /dev/nzqft3 Unit 3, no rewind-on-close, compression
590 32 = /dev/rawqft0 Unit 0, rewind-on-close, no file marks
591 33 = /dev/rawqft1 Unit 1, rewind-on-close, no file marks
592 34 = /dev/rawqft2 Unit 2, rewind-on-close, no file marks
593 35 = /dev/rawqft3 Unit 3, rewind-on-close, no file marks
594 36 = /dev/nrawqft0 Unit 0, no rewind-on-close, no file marks
595 37 = /dev/nrawqft1 Unit 1, no rewind-on-close, no file marks
596 38 = /dev/nrawqft2 Unit 2, no rewind-on-close, no file marks
597 39 = /dev/nrawqft3 Unit 3, no rewind-on-close, no file marks
599 27 block Third Matsushita (Panasonic/SoundBlaster) CD-ROM
600 0 = /dev/sbpcd8 Panasonic CD-ROM controller 2 unit 0
601 1 = /dev/sbpcd9 Panasonic CD-ROM controller 2 unit 1
602 2 = /dev/sbpcd10 Panasonic CD-ROM controller 2 unit 2
603 3 = /dev/sbpcd11 Panasonic CD-ROM controller 2 unit 3
605 28 char Stallion serial card - card programming
615 28 block Fourth Matsushita (Panasonic/SoundBlaster) CD-ROM
616 0 = /dev/sbpcd12 Panasonic CD-ROM controller 3 unit 0
617 1 = /dev/sbpcd13 Panasonic CD-ROM controller 3 unit 1
618 2 = /dev/sbpcd14 Panasonic CD-ROM controller 3 unit 2
619 3 = /dev/sbpcd15 Panasonic CD-ROM controller 3 unit 3
629 disks (see major number 3) except that the limit on
638 29 block Aztech/Orchid/Okano/Wearnes CD-ROM
639 0 = /dev/aztcd Aztech CD-ROM
641 30 char iBCS-2 compatibility devices
655 Additionally, iBCS-2 requires the following links:
657 /dev/ip -> /dev/inet/ip
658 /dev/icmp -> /dev/inet/icmp
659 /dev/ggp -> /dev/inet/ggp
660 /dev/ipip -> /dev/inet/ipip
661 /dev/tcp -> /dev/inet/tcp
662 /dev/egp -> /dev/inet/egp
663 /dev/pup -> /dev/inet/pup
664 /dev/udp -> /dev/inet/udp
665 /dev/idp -> /dev/inet/idp
666 /dev/rawip -> /dev/inet/rawip
667 /dev/inet/arp -> /dev/inet/udp
668 /dev/inet/rip -> /dev/inet/udp
669 /dev/nfsd -> /dev/socksys
670 /dev/X0R -> /dev/null (? apparently not required ?)
672 30 block Philips LMS CM-205 CD-ROM
673 0 = /dev/cm205cd Philips LMS CM-205 CD-ROM
676 driver does not work with the CM-205MS CD-ROM.
678 31 char MPU-401 MIDI
679 0 = /dev/mpu401data MPU-401 data port
680 1 = /dev/mpu401stat MPU-401 status port
696 The read-write (rw) devices support back-caching
698 devices. The read-only devices (ro) support reading
701 32 char Specialix serial card
705 32 block Philips LMS CM-206 CD-ROM
706 0 = /dev/cm206cd Philips LMS CM-206 CD-ROM
708 33 char Specialix serial card - alternate devices
712 33 block Third IDE hard disk/CD-ROM interface
713 0 = /dev/hde Master: whole disk (or CD-ROM)
714 64 = /dev/hdf Slave: whole disk (or CD-ROM)
717 interface (see major number 3).
730 34 block Fourth IDE hard disk/CD-ROM interface
731 0 = /dev/hdg Master: whole disk (or CD-ROM)
732 64 = /dev/hdh Slave: whole disk (or CD-ROM)
735 interface (see major number 3).
768 128 = /dev/nht0 First IDE tape, no rewind-on-close
769 129 = /dev/nht1 Second IDE tape, no rewind-on-close
788 39 char ML-16P experimental I/O board
789 0 = /dev/ml16pa-a0 First card, first analog channel
790 1 = /dev/ml16pa-a1 First card, second analog channel
792 15 = /dev/ml16pa-a15 First card, 16th analog channel
793 16 = /dev/ml16pa-d First card, digital lines
794 17 = /dev/ml16pa-c0 First card, first counter/timer
795 18 = /dev/ml16pa-c1 First card, second counter/timer
796 19 = /dev/ml16pa-c2 First card, third counter/timer
797 32 = /dev/ml16pb-a0 Second card, first analog channel
798 33 = /dev/ml16pb-a1 Second card, second analog channel
800 47 = /dev/ml16pb-a15 Second card, 16th analog channel
801 48 = /dev/ml16pb-d Second card, digital lines
802 49 = /dev/ml16pb-c0 Second card, first counter/timer
803 50 = /dev/ml16pb-c1 Second card, second counter/timer
804 51 = /dev/ml16pb-c2 Second card, third counter/timer
821 This number is intended for use in sample code, as
822 well as a general "example" device number. It
824 distributed; either obtain an official number or use
826 removal of a driver with this number should not cause
830 DEVICE DRIVER USING MAJOR NUMBER 42 IS NONCOMPLIANT.
849 44 char isdn4linux virtual modem - alternate devices
862 disks (see major number 3) except that the partition
886 disks (see major number 3) except that the partition
889 46 char Comtrol Rocketport serial card
893 46 block Parallel port ATAPI CD-ROM devices
894 0 = /dev/pcd0 First parallel port ATAPI CD-ROM
895 1 = /dev/pcd1 Second parallel port ATAPI CD-ROM
896 2 = /dev/pcd2 Third parallel port ATAPI CD-ROM
897 3 = /dev/pcd3 Fourth parallel port ATAPI CD-ROM
899 47 char Comtrol Rocketport serial card - alternate devices
912 48 char SDL RISCom serial card
928 49 char SDL RISCom serial card - alternate devices
948 51 char Baycom radio modem OR Radio Tech BIM-XXX-RS232 radio modem
996 54 char Electrocardiognosis Holter serial card
1001 A custom serial card used by Electrocardiognosis SRL
1003 24-hour heart monitoring equipment.
1027 Additional devices will be added to this number, all
1030 56 block Fifth IDE hard disk/CD-ROM interface
1031 0 = /dev/hdi Master: whole disk (or CD-ROM)
1032 64 = /dev/hdj Slave: whole disk (or CD-ROM)
1035 interface (see major number 3).
1037 57 char Hayes ESP serial card
1042 57 block Sixth IDE hard disk/CD-ROM interface
1043 0 = /dev/hdk Master: whole disk (or CD-ROM)
1044 64 = /dev/hdl Slave: whole disk (or CD-ROM)
1047 interface (see major number 3).
1049 58 char Hayes ESP serial card - alternate devices
1067 running small fs translation drivers) through serial /
1070 NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
1072 60-63 char LOCAL/EXPERIMENTAL USE
1074 60-63 block LOCAL/EXPERIMENTAL USE
1118 65 block SCSI disk devices (16-31)
1126 disks (see major number 3) except that the limit on
1134 66 block SCSI disk devices (32-47)
1142 disks (see major number 3) except that the limit on
1150 67 block SCSI disk devices (48-63)
1158 disks (see major number 3) except that the limit on
1171 68 block SCSI disk devices (64-79)
1179 disks (see major number 3) except that the limit on
1185 69 block SCSI disk devices (80-95)
1193 disks (see major number 3) except that the limit on
1205 70 block SCSI disk devices (96-111)
1213 disks (see major number 3) except that the limit on
1216 71 char Computone IntelliPort II serial card
1234 71 block SCSI disk devices (112-127)
1242 disks (see major number 3) except that the limit on
1245 72 char Computone IntelliPort II serial card - alternate devices
1270 DAC960 (see major number 48) except that the limit on
1273 73 char Computone IntelliPort II serial card - control devices
1290 DAC960 (see major number 48) except that the limit on
1298 Currently for Dolphin Interconnect Solutions' PCI-SCI
1308 DAC960 (see major number 48) except that the limit on
1311 75 char Specialix IO8+ serial card
1325 DAC960 (see major number 48) except that the limit on
1328 76 char Specialix IO8+ serial card - alternate devices
1342 DAC960 (see major number 48) except that the limit on
1356 DAC960 (see major number 48) except that the limit on
1371 DAC960 (see major number 48) except that the limit on
1374 79 char PAM Software's multimodem boards - alternate devices
1386 DAC960 (see major number 48) except that the limit on
1399 disks (see major number 3) except that the limit on
1427 disks (see major number 3) except that the limit on
1445 disks (see major number 3) except that the limit on
1462 disks (see major number 3) except that the limit on
1476 disks (see major number 3) except that the limit on
1492 disks (see major number 3) except that the limit on
1507 disks (see major number 3) except that the limit on
1510 87 char Sony Control-A1 stereo control bus
1522 disks (see major number 3) except that the limit on
1525 88 char COMX synchronous serial card
1530 88 block Seventh IDE hard disk/CD-ROM interface
1531 0 = /dev/hdm Master: whole disk (or CD-ROM)
1532 64 = /dev/hdn Slave: whole disk (or CD-ROM)
1535 interface (see major number 3).
1538 0 = /dev/i2c-0 First I2C adapter
1539 1 = /dev/i2c-1 Second I2C adapter
1542 89 block Eighth IDE hard disk/CD-ROM interface
1543 0 = /dev/hdo Master: whole disk (or CD-ROM)
1544 64 = /dev/hdp Slave: whole disk (or CD-ROM)
1547 interface (see major number 3).
1556 90 block Ninth IDE hard disk/CD-ROM interface
1557 0 = /dev/hdq Master: whole disk (or CD-ROM)
1558 64 = /dev/hdr Slave: whole disk (or CD-ROM)
1561 interface (see major number 3).
1563 91 char CAN-Bus devices
1564 0 = /dev/can0 First CAN-Bus controller
1565 1 = /dev/can1 Second CAN-Bus controller
1568 91 block Tenth IDE hard disk/CD-ROM interface
1569 0 = /dev/hds Master: whole disk (or CD-ROM)
1570 64 = /dev/hdt Slave: whole disk (or CD-ROM)
1573 interface (see major number 3).
1583 disks (see major number 3) except that the limit on
1645 minor number of the associated comedi device and "Y" is the
1646 subdevice number. These subdevice minors are assigned
1653 98 block User-mode virtual block device
1654 0 = /dev/ubda First user-mode block device
1655 16 = /dev/ubdb Second user-mode block device
1659 disks (see major number 3) except that the limit on
1662 This device is used by the user-mode virtual kernel port.
1705 disks (see major number 3) except that the limit on
1716 write to <arla-drinkers@stacken.kth.se> or see
1731 DAC960 (see major number 48) except that the limit on
1734 105 char Comtrol VS-1000 serial controller
1735 0 = /dev/ttyV0 First VS-1000 port
1736 1 = /dev/ttyV1 Second VS-1000 port
1746 DAC960 (see major number 48) except that the limit on
1749 106 char Comtrol VS-1000 serial controller - alternate devices
1750 0 = /dev/cuv0 First VS-1000 port
1751 1 = /dev/cuv1 Second VS-1000 port
1761 DAC960 (see major number 48) except that the limit on
1774 DAC960 (see major number 48) except that the limit on
1787 DAC960 (see major number 48) except that the limit on
1799 DAC960 (see major number 48) except that the limit on
1814 DAC960 (see major number 48) except that the limit on
1826 DAC960 (see major number 48) except that the limit on
1829 112 char ISI serial card
1834 There is currently a device-naming conflict between
1847 disks (see major number 3) except that the limit on
1850 113 char ISI serial card - alternate devices
1855 113 block IBM iSeries virtual CD-ROM
1856 0 = /dev/iseries/vcda First virtual CD-ROM
1857 1 = /dev/iseries/vcdb Second virtual CD-ROM
1887 disks (see major number 3) except that the limit on
1895 8 = /dev/tiser0 Serial cable on first serial port
1897 15 = /dev/tiser7 Serial cable on seventh serial port
1903 115 block NetWare (NWFS) Devices (0-255)
1936 117 char [REMOVED] COSA/SRP synchronous serial card
1946 The EVMS driver uses a layered, plug-in model to provide
1981 120-127 char LOCAL/EXPERIMENTAL USE
1983 120-127 block LOCAL/EXPERIMENTAL USE
1988 128-135 char Unix98 PTY masters
1994 128 block SCSI disk devices (128-143)
2002 disks (see major number 3) except that the limit on
2005 129 block SCSI disk devices (144-159)
2013 disks (see major number 3) except that the limit on
2018 130 block SCSI disk devices (160-175)
2026 disks (see major number 3) except that the limit on
2029 131 block SCSI disk devices (176-191)
2037 disks (see major number 3) except that the limit on
2040 132 block SCSI disk devices (192-207)
2048 disks (see major number 3) except that the limit on
2051 133 block SCSI disk devices (208-223)
2059 disks (see major number 3) except that the limit on
2062 134 block SCSI disk devices (224-239)
2070 disks (see major number 3) except that the limit on
2073 135 block SCSI disk devices (240-255)
2081 disks (see major number 3) except that the limit on
2084 136-143 char Unix98 PTY slaves
2085 0 = /dev/pts/0 First Unix98 pseudo-TTY
2086 1 = /dev/pts/1 Second Unix98 pseudo-TTY
2167 The SST 5136-DN DeviceNet interface driver has been
2170 144 block Expansion Area #1 for more non-device (e.g. NFS) mounts
2174 145 char SAM9407-based soundcard
2191 Device functions match OSS, but offer a number of
2195 145 block Expansion Area #2 for more non-device (e.g. NFS) mounts
2199 146 char SYSTRAM SCRAMNet mirrored-memory network
2204 146 block Expansion Area #3 for more non-device (e.g. NFS) mounts
2218 148 char Technology Concepts serial card
2223 149 char Technology Concepts serial card - alternate devices
2228 150 char Real-Time Linux FIFOs
2267 disks (see major number 3) except that the limit on
2270 154 char Specialix RIO serial card
2275 155 char Specialix RIO serial card - alternate devices
2280 156 char Specialix RIO serial card
2285 157 char Specialix RIO serial card - alternate devices
2304 160 block Carmel 8-port SATA Disks on First Controller
2316 disks (see major number 3) except that the limit on
2319 161 char IrCOMM devices (IrDA serial/parallel emulation)
2327 161 block Carmel 8-port SATA Disks on Second Controller
2339 disks (see major number 3) except that the limit on
2346 164 char Chase Research AT/PCI-Fast serial card
2347 0 = /dev/ttyCH0 AT/PCI-Fast board 0, port 0
2349 15 = /dev/ttyCH15 AT/PCI-Fast board 0, port 15
2350 16 = /dev/ttyCH16 AT/PCI-Fast board 1, port 0
2352 31 = /dev/ttyCH31 AT/PCI-Fast board 1, port 15
2353 32 = /dev/ttyCH32 AT/PCI-Fast board 2, port 0
2355 47 = /dev/ttyCH47 AT/PCI-Fast board 2, port 15
2356 48 = /dev/ttyCH48 AT/PCI-Fast board 3, port 0
2358 63 = /dev/ttyCH63 AT/PCI-Fast board 3, port 15
2360 165 char Chase Research AT/PCI-Fast serial card - alternate devices
2370 167 char ACM USB modems - alternate devices
2381 0 = /dev/ecsa8-0 First CSA8000
2382 1 = /dev/ecsa8-1 Second CSA8000
2392 172 char Moxa Intellio serial card
2399 173 char Moxa Intellio serial card - alternate devices
2405 174 char SmartIO serial card
2410 175 char SmartIO serial card - alternate devices
2448 179 char CCube DVXChip-based PCI products
2503 183 char SST 5136-DN DeviceNet interface
2508 This device used to be assigned to major number 144.
2522 http://inter-mezzo.org/index.html
2524 186 char Object-based storage control device
2536 188 char USB serial converters
2537 0 = /dev/ttyUSB0 First USB serial converter
2538 1 = /dev/ttyUSB1 Second USB serial converter
2541 189 char USB serial converters - alternate devices
2559 193 char Kernel event-tracing interface
2593 49 = /dev/tor/49 First pseudo-channel
2594 50 = /dev/tor/50 Second pseudo-channel
2642 202 char CPU model-specific registers
2655 disks (see major number 3) except that the limit on
2663 204 char Low-density serial ports
2664 0 = /dev/ttyLU0 LinkUp Systems L72xx UART - port 0
2665 1 = /dev/ttyLU1 LinkUp Systems L72xx UART - port 1
2666 2 = /dev/ttyLU2 LinkUp Systems L72xx UART - port 2
2667 3 = /dev/ttyLU3 LinkUp Systems L72xx UART - port 3
2669 5 = /dev/ttySA0 StrongARM builtin serial port 0
2670 6 = /dev/ttySA1 StrongARM builtin serial port 1
2671 7 = /dev/ttySA2 StrongARM builtin serial port 2
2672 8 = /dev/ttySC0 SCI serial port (SuperH) - port 0
2673 9 = /dev/ttySC1 SCI serial port (SuperH) - port 1
2674 10 = /dev/ttySC2 SCI serial port (SuperH) - port 2
2675 11 = /dev/ttySC3 SCI serial port (SuperH) - port 3
2676 12 = /dev/ttyFW0 Firmware console - port 0
2677 13 = /dev/ttyFW1 Firmware console - port 1
2678 14 = /dev/ttyFW2 Firmware console - port 2
2679 15 = /dev/ttyFW3 Firmware console - port 3
2680 16 = /dev/ttyAM0 ARM "AMBA" serial port 0
2682 31 = /dev/ttyAM15 ARM "AMBA" serial port 15
2683 32 = /dev/ttyDB0 DataBooster serial port 0
2685 39 = /dev/ttyDB7 DataBooster serial port 7
2687 41 = /dev/ttySMX0 Motorola i.MX - port 0
2688 42 = /dev/ttySMX1 Motorola i.MX - port 1
2689 43 = /dev/ttySMX2 Motorola i.MX - port 2
2690 44 = /dev/ttyMM0 Marvell MPSC - port 0 (obsolete unused)
2691 45 = /dev/ttyMM1 Marvell MPSC - port 1 (obsolete unused)
2692 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
2694 51 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
2697 148 = /dev/ttyPSC0 PPC PSC - port 0
2699 153 = /dev/ttyPSC5 PPC PSC - port 5
2700 154 = /dev/ttyAT0 ATMEL serial port 0
2702 169 = /dev/ttyAT15 ATMEL serial port 15
2703 170 = /dev/ttyNX0 Hilscher netX serial port 0
2705 185 = /dev/ttyNX15 Hilscher netX serial port 15
2706 186 = /dev/ttyJ0 JTAG1 DCC protocol based serial port emulation
2708 If maximum number of uartlite serial ports is more than 4, then the driver
2709 uses dynamic allocation instead of static allocation for major number.
2710 187 = /dev/ttyUL0 Xilinx uartlite - port 0
2712 190 = /dev/ttyUL3 Xilinx uartlite - port 3
2713 191 = /dev/xvc0 Xen virtual console - port 0
2714 192 = /dev/ttyPZ0 pmac_zilog - port 0
2716 195 = /dev/ttyPZ3 pmac_zilog - port 3
2717 196 = /dev/ttyTX0 TX39/49 serial port 0
2719 204 = /dev/ttyTX7 TX39/49 serial port 7
2720 205 = /dev/ttySC0 SC26xx serial port 0
2721 206 = /dev/ttySC1 SC26xx serial port 1
2722 207 = /dev/ttySC2 SC26xx serial port 2
2723 208 = /dev/ttySC3 SC26xx serial port 3
2724 209 = /dev/ttyMAX0 MAX3100 serial port 0
2725 210 = /dev/ttyMAX1 MAX3100 serial port 1
2726 211 = /dev/ttyMAX2 MAX3100 serial port 2
2727 212 = /dev/ttyMAX3 MAX3100 serial port 3
2729 205 char Low-density serial ports (alternate device)
2762 206 char OnStream SC-x0 tape devices
2788 The OnStream SC-x0 SCSI tapes do not support the
2791 maybe ParPort) versions may be driven via ide-scsi or
2792 usb-storage SCSI emulation and this osst device and
2793 driver as well. The ADR-x0 drives are QIC-157
2810 208 char User space serial ports
2811 0 = /dev/ttyU0 First user space serial port
2812 1 = /dev/ttyU1 Second user space serial port
2815 209 char User space serial ports (alternate devices)
2820 210 char SBE, Inc. sync/async serial card
2859 8 = /dev/dvb/adapter0/osd0 first on-screen-display device of first card
2883 219 char The Logical Company DCI-1300 digital I/O card
2884 0 = /dev/logicalco/dci1300/0 First DCI-1300 card
2885 1 = /dev/logicalco/dci1300/1 Second DCI-1300 card
2910 224 char A2232 serial card
2915 225 char A2232 serial card (alternate devices)
2930 228 char IBM 3270 terminal block-mode access
3008 234-254 char RESERVED FOR DYNAMIC ASSIGNMENT
3009 Character devices that request a dynamic allocation of major number will
3012 240-254 block LOCAL/EXPERIMENTAL USE
3022 larger number space. No device nodes with this major
3027 ---LARGE MAJORS!!!!!---
3029 256 char Equinox SST multi-port serial boards
3030 0 = /dev/ttyEQ0 First serial port on first Equinox SST board
3031 127 = /dev/ttyEQ127 Last serial port on first Equinox SST board
3032 128 = /dev/ttyEQ128 First serial port on second Equinox SST board
3034 1027 = /dev/ttyEQ1027 Last serial port on eighth Equinox SST board
3055 258 block ROM/Flash read-only translation layer
3068 260 char OSD (Object-based-device) SCSI Device
3079 384-511 char RESERVED FOR DYNAMIC ASSIGNMENT
3081 number will take numbers starting from 511 and downward,
3082 once the 234-254 range is full.