Lines Matching +full:2 +full:- +full:way
1 0 Unnamed devices (e.g. non-device mounts)
7 2 = /dev/kmem OBSOLETE - replaced by /proc/kcore
11 6 = /dev/core OBSOLETE - replaced by /proc/kcore
18 12 = /dev/oldmem OBSOLETE - replaced by /proc/vmcore
31 2 char Pseudo-TTY masters
37 Pseudo-tty's are named as follows:
40 the 1st through 16th series of 16 pseudo-ttys each, and
44 These are the old-style (BSD) PTY devices; Unix98
49 2 block Floppy disks
52 2 = /dev/fd2 Controller 0, drive 2, autodetect
56 130 = /dev/fd6 Controller 1, drive 2, autodetect
73 12 = /dev/fd?u360 3.5" 360K Double Density(2)
75 120 = /dev/fd?u800 3.5" 800K Double Density(2)
96 (2) Autodetectable format in a Double Density (720K) drive only
106 3 char Pseudo-TTY slaves
112 These are the old-style (BSD) PTY devices; Unix98
115 3 block First MFM, RLL and IDE hard disk/CD-ROM interface
116 0 = /dev/hda Master: whole disk (or CD-ROM)
117 64 = /dev/hdb Slave: whole disk (or CD-ROM)
122 2 = /dev/hd?2 Second partition
126 For Linux/i386, partitions 1-4 are the primary
145 is no longer supported. Use major numbers 2 and 3.
149 because the root filesystem is mounted read-only.
156 2 = /dev/ptmx PTY master multiplex
200 8 block SCSI disk devices (0-15)
207 Partitions are handled in the same way as for IDE
218 64 = /dev/st0m First SCSI tape, mode 2
219 65 = /dev/st1m Second SCSI tape, mode 2
230 192 = /dev/nst0m First SCSI tape, mode 2, no rewind
231 193 = /dev/nst1m Second SCSI tape, mode 2, no rewind
250 10 char Non-serial mice, misc features
252 1 = /dev/psaux PS/2-style mouse port
253 2 = /dev/inportbm Microsoft Inport bus mouse
255 4 = /dev/jbm J-mouse
261 9 = /dev/pc110pad IBM PC-110 digitizer pad
278 141 = /dev/relay16 Berkshire Products ISO-16 relay card
281 144 = /dev/nvram Non-volatile configuration RAM
298 161 = /dev/userdma User-space DMA access
316 179 = /dev/xsvc High-speed shared-mem/semaphore service
319 182 = /dev/perfctr Performance-monitoring counters
329 193 = /dev/d7s SPARC 7-segment display
330 194 = /dev/zkshim Zero-Knowledge network shim control
331 195 = /dev/elographics/e2201 Elographics touchscreen E271-2201
333 197 = /dev/pxa3xx-gcu PXA3xx graphics controller unit driver
337 201 = /dev/button/gulpb Transmeta GULP-B buttons
339 203 = /dev/cuse Cuse (character device in user-space)
350 214 = /dev/watchdogs/2 Third watchdog device
354 218 = /dev/kchuid Inter-process chuid control
365 229 = /dev/fuse Fuse (virtual filesystem in user-space)
368 232 = /dev/kvm Kernel-based virtual machine (hardware virtualization extensions)
369 233 = /dev/kmview View-OS A process with a view
370 234 = /dev/btrfs-control Btrfs control device
372 236 = /dev/mapper/control Device-Mapper control device
373 237 = /dev/loop-control Loopback control device
374 238 = /dev/vhost-net Host kernel accelerator for virtio net
375 239 = /dev/uhid User-space I/O driver support for HID subsystem
377 241 = /dev/vhost-vsock Host kernel driver for virtio vsock
380 243-254 Reserved for local use
386 11 char Serial Mux device (Linux/PA-RISC only)
391 11 block SCSI CD-ROM devices
392 0 = /dev/scd0 First SCSI CD-ROM
393 1 = /dev/scd1 Second SCSI CD-ROM
398 12 char QIC-02 tape
399 2 = /dev/ntpqic11 QIC-11, no rewind-on-close
400 3 = /dev/tpqic11 QIC-11, rewind-on-close
401 4 = /dev/ntpqic24 QIC-24, no rewind-on-close
402 5 = /dev/tpqic24 QIC-24, rewind-on-close
403 6 = /dev/ntpqic120 QIC-120, no rewind-on-close
404 7 = /dev/tpqic120 QIC-120, rewind-on-close
405 8 = /dev/ntpqic150 QIC-150, no rewind-on-close
406 9 = /dev/tpqic150 QIC-150, rewind-on-close
408 The device names specified are proposed -- if there
433 2 = /dev/midi00 First MIDI port
435 4 = /dev/audio Sun-compatible digital audio
438 8 = /dev/sequencer2 Sequencer -- alternate device
457 15 block Sony CDU-31A/CDU-33A CD-ROM
458 0 = /dev/sonycd Sony CDU-31a CD-ROM
460 16 char Non-SCSI scanners
463 16 block GoldStar CD-ROM
464 0 = /dev/gscd GoldStar CD-ROM
470 17 block Optics Storage CD-ROM
471 0 = /dev/optcd Optics Storage CD-ROM
473 18 char OBSOLETE (was Chase serial card - alternate devices)
477 18 block Sanyo CD-ROM
478 0 = /dev/sjcd Sanyo CD-ROM
491 20 block Hitachi CD-ROM (under development)
492 0 = /dev/hitcd Hitachi CD-ROM
502 device-naming practice.
508 This device is used on the ARM-based Acorn RiscPC.
509 Partitions are handled the same way as for IDE disks
516 22 block Second IDE hard disk/CD-ROM interface
517 0 = /dev/hdc Master: whole disk (or CD-ROM)
518 64 = /dev/hdd Slave: whole disk (or CD-ROM)
520 Partitions are handled the same way as for the first
523 23 char Digiboard serial card - alternate devices
527 23 block Mitsumi proprietary CD-ROM
528 0 = /dev/mcd Mitsumi CD-ROM
537 128 = /dev/ttyE128 Stallion port 0 card 2
538 129 = /dev/ttyE129 Stallion port 1 card 2
543 24 block Sony CDU-535 CD-ROM
544 0 = /dev/cdu535 Sony CDU-535 CD-ROM
546 25 char Stallion serial card - alternate devices
559 25 block First Matsushita (Panasonic/SoundBlaster) CD-ROM
560 0 = /dev/sbpcd0 Panasonic CD-ROM controller 0 unit 0
561 1 = /dev/sbpcd1 Panasonic CD-ROM controller 0 unit 1
562 2 = /dev/sbpcd2 Panasonic CD-ROM controller 0 unit 2
563 3 = /dev/sbpcd3 Panasonic CD-ROM controller 0 unit 3
567 26 block Second Matsushita (Panasonic/SoundBlaster) CD-ROM
568 0 = /dev/sbpcd4 Panasonic CD-ROM controller 1 unit 0
569 1 = /dev/sbpcd5 Panasonic CD-ROM controller 1 unit 1
570 2 = /dev/sbpcd6 Panasonic CD-ROM controller 1 unit 2
571 3 = /dev/sbpcd7 Panasonic CD-ROM controller 1 unit 3
573 27 char QIC-117 tape
574 0 = /dev/qft0 Unit 0, rewind-on-close
575 1 = /dev/qft1 Unit 1, rewind-on-close
576 2 = /dev/qft2 Unit 2, rewind-on-close
577 3 = /dev/qft3 Unit 3, rewind-on-close
578 4 = /dev/nqft0 Unit 0, no rewind-on-close
579 5 = /dev/nqft1 Unit 1, no rewind-on-close
580 6 = /dev/nqft2 Unit 2, no rewind-on-close
581 7 = /dev/nqft3 Unit 3, no rewind-on-close
582 16 = /dev/zqft0 Unit 0, rewind-on-close, compression
583 17 = /dev/zqft1 Unit 1, rewind-on-close, compression
584 18 = /dev/zqft2 Unit 2, rewind-on-close, compression
585 19 = /dev/zqft3 Unit 3, rewind-on-close, compression
586 20 = /dev/nzqft0 Unit 0, no rewind-on-close, compression
587 21 = /dev/nzqft1 Unit 1, no rewind-on-close, compression
588 22 = /dev/nzqft2 Unit 2, no rewind-on-close, compression
589 23 = /dev/nzqft3 Unit 3, no rewind-on-close, compression
590 32 = /dev/rawqft0 Unit 0, rewind-on-close, no file marks
591 33 = /dev/rawqft1 Unit 1, rewind-on-close, no file marks
592 34 = /dev/rawqft2 Unit 2, rewind-on-close, no file marks
593 35 = /dev/rawqft3 Unit 3, rewind-on-close, no file marks
594 36 = /dev/nrawqft0 Unit 0, no rewind-on-close, no file marks
595 37 = /dev/nrawqft1 Unit 1, no rewind-on-close, no file marks
596 38 = /dev/nrawqft2 Unit 2, no rewind-on-close, no file marks
597 39 = /dev/nrawqft3 Unit 3, no rewind-on-close, no file marks
599 27 block Third Matsushita (Panasonic/SoundBlaster) CD-ROM
600 0 = /dev/sbpcd8 Panasonic CD-ROM controller 2 unit 0
601 1 = /dev/sbpcd9 Panasonic CD-ROM controller 2 unit 1
602 2 = /dev/sbpcd10 Panasonic CD-ROM controller 2 unit 2
603 3 = /dev/sbpcd11 Panasonic CD-ROM controller 2 unit 3
605 28 char Stallion serial card - card programming
608 2 = /dev/staliomem2 Third Stallion card I/O memory
615 28 block Fourth Matsushita (Panasonic/SoundBlaster) CD-ROM
616 0 = /dev/sbpcd12 Panasonic CD-ROM controller 3 unit 0
617 1 = /dev/sbpcd13 Panasonic CD-ROM controller 3 unit 1
618 2 = /dev/sbpcd14 Panasonic CD-ROM controller 3 unit 2
619 3 = /dev/sbpcd15 Panasonic CD-ROM controller 3 unit 3
628 Partitions are handled in the same way as for IDE
638 29 block Aztech/Orchid/Okano/Wearnes CD-ROM
639 0 = /dev/aztcd Aztech CD-ROM
641 30 char iBCS-2 compatibility devices
655 Additionally, iBCS-2 requires the following links:
657 /dev/ip -> /dev/inet/ip
658 /dev/icmp -> /dev/inet/icmp
659 /dev/ggp -> /dev/inet/ggp
660 /dev/ipip -> /dev/inet/ipip
661 /dev/tcp -> /dev/inet/tcp
662 /dev/egp -> /dev/inet/egp
663 /dev/pup -> /dev/inet/pup
664 /dev/udp -> /dev/inet/udp
665 /dev/idp -> /dev/inet/idp
666 /dev/rawip -> /dev/inet/rawip
667 /dev/inet/arp -> /dev/inet/udp
668 /dev/inet/rip -> /dev/inet/udp
669 /dev/nfsd -> /dev/socksys
670 /dev/X0R -> /dev/null (? apparently not required ?)
672 30 block Philips LMS CM-205 CD-ROM
673 0 = /dev/cm205cd Philips LMS CM-205 CD-ROM
676 driver does not work with the CM-205MS CD-ROM.
678 31 char MPU-401 MIDI
679 0 = /dev/mpu401data MPU-401 data port
680 1 = /dev/mpu401stat MPU-401 status port
696 The read-write (rw) devices support back-caching
698 devices. The read-only devices (ro) support reading
705 32 block Philips LMS CM-206 CD-ROM
706 0 = /dev/cm206cd Philips LMS CM-206 CD-ROM
708 33 char Specialix serial card - alternate devices
712 33 block Third IDE hard disk/CD-ROM interface
713 0 = /dev/hde Master: whole disk (or CD-ROM)
714 64 = /dev/hdf Slave: whole disk (or CD-ROM)
716 Partitions are handled the same way as for the first
722 2 = /dev/scc2 Second Z8530, first port
730 34 block Fourth IDE hard disk/CD-ROM interface
731 0 = /dev/hdg Master: whole disk (or CD-ROM)
732 64 = /dev/hdh Slave: whole disk (or CD-ROM)
734 Partitions are handled the same way as for the first
740 2 = /dev/midi2 Third MIDI port, kernel timed
768 128 = /dev/nht0 First IDE tape, no rewind-on-close
769 129 = /dev/nht1 Second IDE tape, no rewind-on-close
788 39 char ML-16P experimental I/O board
789 0 = /dev/ml16pa-a0 First card, first analog channel
790 1 = /dev/ml16pa-a1 First card, second analog channel
792 15 = /dev/ml16pa-a15 First card, 16th analog channel
793 16 = /dev/ml16pa-d First card, digital lines
794 17 = /dev/ml16pa-c0 First card, first counter/timer
795 18 = /dev/ml16pa-c1 First card, second counter/timer
796 19 = /dev/ml16pa-c2 First card, third counter/timer
797 32 = /dev/ml16pb-a0 Second card, first analog channel
798 33 = /dev/ml16pb-a1 Second card, second analog channel
800 47 = /dev/ml16pb-a15 Second card, 16th analog channel
801 48 = /dev/ml16pb-d Second card, digital lines
802 49 = /dev/ml16pb-c0 Second card, first counter/timer
803 50 = /dev/ml16pb-c1 Second card, second counter/timer
804 51 = /dev/ml16pb-c2 Second card, third counter/timer
849 44 char isdn4linux virtual modem - alternate devices
861 Partitions are handled in the same way as for IDE
885 Partitions are handled in the same way as for IDE
893 46 block Parallel port ATAPI CD-ROM devices
894 0 = /dev/pcd0 First parallel port ATAPI CD-ROM
895 1 = /dev/pcd1 Second parallel port ATAPI CD-ROM
896 2 = /dev/pcd2 Third parallel port ATAPI CD-ROM
897 3 = /dev/pcd3 Fourth parallel port ATAPI CD-ROM
899 47 char Comtrol Rocketport serial card - alternate devices
906 2 = /dev/pf2 Third parallel port ATAPI disk
928 49 char SDL RISCom serial card - alternate devices
948 51 char Baycom radio modem OR Radio Tech BIM-XXX-RS232 radio modem
963 2 = /dev/dcbri2 Third DataComm card
977 2 = /dev/pd_bdm2 PD BDM interface on lp2
999 2 = /dev/holter2 Third Holter port
1003 24-hour heart monitoring equipment.
1030 56 block Fifth IDE hard disk/CD-ROM interface
1031 0 = /dev/hdi Master: whole disk (or CD-ROM)
1032 64 = /dev/hdj Slave: whole disk (or CD-ROM)
1034 Partitions are handled the same way as for the first
1042 57 block Sixth IDE hard disk/CD-ROM interface
1043 0 = /dev/hdk Master: whole disk (or CD-ROM)
1044 64 = /dev/hdl Slave: whole disk (or CD-ROM)
1046 Partitions are handled the same way as for the first
1049 58 char Hayes ESP serial card - alternate devices
1070 NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
1072 60-63 char LOCAL/EXPERIMENTAL USE
1074 60-63 block LOCAL/EXPERIMENTAL USE
1085 2 = /dev/scramdisk/2 Second encrypted device
1100 2 = /dev/plink2 Third plink device
1118 65 block SCSI disk devices (16-31)
1125 Partitions are handled in the same way as for IDE
1134 66 block SCSI disk devices (32-47)
1141 Partitions are handled in the same way as for IDE
1150 67 block SCSI disk devices (48-63)
1157 Partitions are handled in the same way as for IDE
1164 2 = /dev/capi20.01 Second CAPI 2.0 application
1171 68 block SCSI disk devices (64-79)
1178 Partitions are handled in the same way as for IDE
1185 69 block SCSI disk devices (80-95)
1192 Partitions are handled in the same way as for IDE
1199 2 = /dev/apslog Logging interface
1205 70 block SCSI disk devices (96-111)
1212 Partitions are handled in the same way as for IDE
1225 128 = /dev/ttyF128 IntelliPort II board 2, port 0
1226 129 = /dev/ttyF129 IntelliPort II board 2, port 1
1228 191 = /dev/ttyF191 IntelliPort II board 2, port 63
1234 71 block SCSI disk devices (112-127)
1241 Partitions are handled in the same way as for IDE
1245 72 char Computone IntelliPort II serial card - alternate devices
1269 Partitions are handled the same way as for Mylex
1273 73 char Computone IntelliPort II serial card - control devices
1278 8 = /dev/ip2ipl2 Loadware device for board 2
1279 9 = /dev/ip2stat2 Status device for board 2
1289 Partitions are handled the same way as for Mylex
1298 Currently for Dolphin Interconnect Solutions' PCI-SCI
1307 Partitions are handled the same way as for Mylex
1324 Partitions are handled the same way as for Mylex
1328 76 char Specialix IO8+ serial card - alternate devices
1341 Partitions are handled the same way as for Mylex
1355 Partitions are handled the same way as for Mylex
1370 Partitions are handled the same way as for Mylex
1374 79 char PAM Software's multimodem boards - alternate devices
1385 Partitions are handled the same way as for Mylex
1398 Partitions are handled in the same way as for IDE
1426 Partitions are handled in the same way as for IDE
1444 Partitions are handled in the same way as for IDE
1450 1 = /dev/mga_vid1 2nd video card
1451 2 = /dev/mga_vid2 3rd video card
1461 Partitions are handled in the same way as for IDE
1475 Partitions are handled in the same way as for IDE
1482 2 = /dev/qcntl1 Second device pushed
1491 Partitions are handled in the same way as for IDE
1506 Partitions are handled in the same way as for IDE
1510 87 char Sony Control-A1 stereo control bus
1521 Partitions are handled in the same way as for IDE
1530 88 block Seventh IDE hard disk/CD-ROM interface
1531 0 = /dev/hdm Master: whole disk (or CD-ROM)
1532 64 = /dev/hdn Slave: whole disk (or CD-ROM)
1534 Partitions are handled the same way as for the first
1538 0 = /dev/i2c-0 First I2C adapter
1539 1 = /dev/i2c-1 Second I2C adapter
1542 89 block Eighth IDE hard disk/CD-ROM interface
1543 0 = /dev/hdo Master: whole disk (or CD-ROM)
1544 64 = /dev/hdp Slave: whole disk (or CD-ROM)
1546 Partitions are handled the same way as for the first
1556 90 block Ninth IDE hard disk/CD-ROM interface
1557 0 = /dev/hdq Master: whole disk (or CD-ROM)
1558 64 = /dev/hdr Slave: whole disk (or CD-ROM)
1560 Partitions are handled the same way as for the first
1563 91 char CAN-Bus devices
1564 0 = /dev/can0 First CAN-Bus controller
1565 1 = /dev/can1 Second CAN-Bus controller
1568 91 block Tenth IDE hard disk/CD-ROM interface
1569 0 = /dev/hds Master: whole disk (or CD-ROM)
1570 64 = /dev/hdt Slave: whole disk (or CD-ROM)
1572 Partitions are handled the same way as for the first
1582 Partitions are handled in the same way as for IDE
1599 2 = /dev/dasda2 First DASD device, block 2
1603 6 = /dev/dasdb2 Second DASD device, block 2
1610 2 = /dev/ipstate State information log file
1631 2 = /dev/pg2 Third parallel port ATAPI device
1653 98 block User-mode virtual block device
1654 0 = /dev/ubda First user-mode block device
1655 16 = /dev/ubdb Second user-mode block device
1658 Partitions are handled in the same way as for IDE
1662 This device is used by the user-mode virtual kernel port.
1692 2 = /dev/amiraid/ar?p2 Second partition
1704 Partitions are handled in the same way as for IDE
1716 write to <arla-drinkers@stacken.kth.se> or see
1730 Partitions are handled the same way as for Mylex
1734 105 char Comtrol VS-1000 serial controller
1735 0 = /dev/ttyV0 First VS-1000 port
1736 1 = /dev/ttyV1 Second VS-1000 port
1745 Partitions are handled the same way as for Mylex
1749 106 char Comtrol VS-1000 serial controller - alternate devices
1750 0 = /dev/cuv0 First VS-1000 port
1751 1 = /dev/cuv1 Second VS-1000 port
1760 Partitions are handled the same way as for Mylex
1773 Partitions are handled the same way as for Mylex
1786 Partitions are handled the same way as for Mylex
1798 Partitions are handled the same way as for Mylex
1813 Partitions are handled the same way as for Mylex
1825 Partitions are handled the same way as for Mylex
1834 There is currently a device-naming conflict between
1846 Partitions are handled in the same way as for IDE
1850 113 char ISI serial card - alternate devices
1855 113 block IBM iSeries virtual CD-ROM
1856 0 = /dev/iseries/vcda First virtual CD-ROM
1857 1 = /dev/iseries/vcdb Second virtual CD-ROM
1878 2 = /dev/ataraid/d0p2
1886 Partitions are handled in the same way as for IDE
1903 115 block NetWare (NWFS) Devices (0-255)
1916 2 = /dev/nwfs/v2 Third NetWare (NWFS) Logical Volume
1928 2 = /dev/umem/d0p2 Second partition of first board
1938 1 = /dev/cosa0c1 1st board, 2nd channel
1940 16 = /dev/cosa1c0 2nd board, 1st channel
1941 17 = /dev/cosa1c1 2nd board, 2nd channel
1946 The EVMS driver uses a layered, plug-in model to provide
1959 2 = /dev/evms/legacyname2 Second EVMS legacy device
1973 2 = /dev/ica1 IBMCA Device 1
1978 1 = /dev/vnet1 2nd virtual network
1981 120-127 char LOCAL/EXPERIMENTAL USE
1983 120-127 block LOCAL/EXPERIMENTAL USE
1988 128-135 char Unix98 PTY masters
1994 128 block SCSI disk devices (128-143)
2001 Partitions are handled in the same way as for IDE
2005 129 block SCSI disk devices (144-159)
2012 Partitions are handled in the same way as for IDE
2018 130 block SCSI disk devices (160-175)
2025 Partitions are handled in the same way as for IDE
2029 131 block SCSI disk devices (176-191)
2036 Partitions are handled in the same way as for IDE
2040 132 block SCSI disk devices (192-207)
2047 Partitions are handled in the same way as for IDE
2051 133 block SCSI disk devices (208-223)
2058 Partitions are handled in the same way as for IDE
2062 134 block SCSI disk devices (224-239)
2069 Partitions are handled in the same way as for IDE
2073 135 block SCSI disk devices (240-255)
2080 Partitions are handled in the same way as for IDE
2084 136-143 char Unix98 PTY slaves
2085 0 = /dev/pts/0 First Unix98 pseudo-TTY
2086 1 = /dev/pts/1 Second Unix98 pseudo-TTY
2167 The SST 5136-DN DeviceNet interface driver has been
2170 144 block Expansion Area #1 for more non-device (e.g. NFS) mounts
2174 145 char SAM9407-based soundcard
2177 2 = /dev/sam0_midi00
2195 145 block Expansion Area #2 for more non-device (e.g. NFS) mounts
2199 146 char SYSTRAM SCRAMNet mirrored-memory network
2204 146 block Expansion Area #3 for more non-device (e.g. NFS) mounts
2223 149 char Technology Concepts serial card - alternate devices
2228 150 char Real-Time Linux FIFOs
2241 2 = /dev/etherd/raw Raw AoE packet monitor
2257 2 = /dev/emd/0p2 Partition 2 on First unit
2262 32 = /dev/emd/2 Third unit
2266 Partitions are handled in the same way as for IDE
2275 155 char Specialix RIO serial card - alternate devices
2285 157 char Specialix RIO serial card - alternate devices
2304 160 block Carmel 8-port SATA Disks on First Controller
2311 64 = /dev/carmel/2 SATA disk 2 whole disk
2315 Partitions are handled in the same way as for IDE
2327 161 block Carmel 8-port SATA Disks on Second Controller
2338 Partitions are handled in the same way as for IDE
2346 164 char Chase Research AT/PCI-Fast serial card
2347 0 = /dev/ttyCH0 AT/PCI-Fast board 0, port 0
2349 15 = /dev/ttyCH15 AT/PCI-Fast board 0, port 15
2350 16 = /dev/ttyCH16 AT/PCI-Fast board 1, port 0
2352 31 = /dev/ttyCH31 AT/PCI-Fast board 1, port 15
2353 32 = /dev/ttyCH32 AT/PCI-Fast board 2, port 0
2355 47 = /dev/ttyCH47 AT/PCI-Fast board 2, port 15
2356 48 = /dev/ttyCH48 AT/PCI-Fast board 3, port 0
2358 63 = /dev/ttyCH63 AT/PCI-Fast board 3, port 15
2360 165 char Chase Research AT/PCI-Fast serial card - alternate devices
2370 167 char ACM USB modems - alternate devices
2381 0 = /dev/ecsa8-0 First CSA8000
2382 1 = /dev/ecsa8-1 Second CSA8000
2399 173 char Moxa Intellio serial card - alternate devices
2410 175 char SmartIO serial card - alternate devices
2448 179 char CCube DVXChip-based PCI products
2503 183 char SST 5136-DN DeviceNet interface
2522 http://inter-mezzo.org/index.html
2524 186 char Object-based storage control device
2541 189 char USB serial converters - alternate devices
2556 2 = /dev/profile1 Profiling device for CPU 1
2559 193 char Kernel event-tracing interface
2562 2 = /dev/trace1 Tracing device for CPU 1
2568 2 = /dev/mvideo/frame0 Single compressed frame
2590 2 = /dev/tor/2 Second DS0
2593 49 = /dev/tor/49 First pseudo-channel
2594 50 = /dev/tor/50 Second pseudo-channel
2625 2 = /dev/vx/iod Volume i/o daemon access node
2642 202 char CPU model-specific registers
2654 Partitions are handled in the same way as for IDE
2663 204 char Low-density serial ports
2664 0 = /dev/ttyLU0 LinkUp Systems L72xx UART - port 0
2665 1 = /dev/ttyLU1 LinkUp Systems L72xx UART - port 1
2666 2 = /dev/ttyLU2 LinkUp Systems L72xx UART - port 2
2667 3 = /dev/ttyLU3 LinkUp Systems L72xx UART - port 3
2671 7 = /dev/ttySA2 StrongARM builtin serial port 2
2672 8 = /dev/ttySC0 SCI serial port (SuperH) - port 0
2673 9 = /dev/ttySC1 SCI serial port (SuperH) - port 1
2674 10 = /dev/ttySC2 SCI serial port (SuperH) - port 2
2675 11 = /dev/ttySC3 SCI serial port (SuperH) - port 3
2676 12 = /dev/ttyFW0 Firmware console - port 0
2677 13 = /dev/ttyFW1 Firmware console - port 1
2678 14 = /dev/ttyFW2 Firmware console - port 2
2679 15 = /dev/ttyFW3 Firmware console - port 3
2687 41 = /dev/ttySMX0 Motorola i.MX - port 0
2688 42 = /dev/ttySMX1 Motorola i.MX - port 1
2689 43 = /dev/ttySMX2 Motorola i.MX - port 2
2690 44 = /dev/ttyMM0 Marvell MPSC - port 0 (obsolete unused)
2691 45 = /dev/ttyMM1 Marvell MPSC - port 1 (obsolete unused)
2692 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
2694 51 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
2697 148 = /dev/ttyPSC0 PPC PSC - port 0
2699 153 = /dev/ttyPSC5 PPC PSC - port 5
2710 187 = /dev/ttyUL0 Xilinx uartlite - port 0
2712 190 = /dev/ttyUL3 Xilinx uartlite - port 3
2713 191 = /dev/xvc0 Xen virtual console - port 0
2714 192 = /dev/ttyPZ0 pmac_zilog - port 0
2716 195 = /dev/ttyPZ3 pmac_zilog - port 3
2722 207 = /dev/ttySC2 SC26xx serial port 2
2726 211 = /dev/ttyMAX2 MAX3100 serial port 2
2729 205 char Low-density serial ports (alternate device)
2732 2 = /dev/culu2 Callout device for ttyLU2
2762 206 char OnStream SC-x0 tape devices
2769 64 = /dev/osst0m First OnStream SCSI tape, mode 2
2770 65 = /dev/osst1m Second OnStream SCSI tape, mode 2
2788 The OnStream SC-x0 SCSI tapes do not support the
2791 maybe ParPort) versions may be driven via ide-scsi or
2792 usb-storage SCSI emulation and this osst device and
2793 driver as well. The ADR-x0 drives are QIC-157
2799 2 = /dev/cpqhealth/cdt Data Table
2823 2 = /dev/sbei/wan00 WAN device, port 0, board 0
2825 4 = /dev/sbei/wan02 WAN device, port 2, board 0
2829 8 = /dev/sbei/wanc02 WAN clone device, port 2, board 0
2835 14 = /dev/sbei/wan12 WAN device, port 2, board 1
2839 18 = /dev/sbei/wanc12 WAN clone device, port 2, board 1
2853 2 = /dev/dvb/adapter0/sec0 (obsolete/unused)
2859 8 = /dev/dvb/adapter0/osd0 first on-screen-display device of first card
2883 219 char The Logical Company DCI-1300 digital I/O card
2884 0 = /dev/logicalco/dci1300/0 First DCI-1300 card
2885 1 = /dev/logicalco/dci1300/1 Second DCI-1300 card
2891 2 = /dev/myricom/gm1 Second Myrinet GM board
2898 2 = /dev/bus/vme/m2 Third master image
2927 2 = /dev/3270/tty2 Seconds 3270 terminal
2930 228 char IBM 3270 terminal block-mode access
2933 2 = /dev/3270/tub2 Second 3270 terminal
2948 64 = /dev/iseries/vt0m First virtual tape, mode 2
2949 65 = /dev/iseries/vt1m Second virtual tape, mode 2
2960 192 = /dev/iseries/nvt0m First virtual tape, mode 2, no rewind
2961 193 = /dev/iseries/nvt1m Second virtual tape, mode 2, no rewind
2989 2 = /dev/biometric/sensor0/retina first retina sensor on first device
3002 2 = /dev/ipath1 Access specifically to unit 1
3008 234-254 char RESERVED FOR DYNAMIC ASSIGNMENT
3012 240-254 block LOCAL/EXPERIMENTAL USE
3027 ---LARGE MAJORS!!!!!---
3029 256 char Equinox SST multi-port serial boards
3055 258 block ROM/Flash read-only translation layer
3068 260 char OSD (Object-based-device) SCSI Device
3079 384-511 char RESERVED FOR DYNAMIC ASSIGNMENT
3082 once the 234-254 range is full.