Lines Matching +full:system +full:- +full:clock +full:- +full:direction +full:- +full:out
18 uses for clock adjustments.
24 IRIG adjustments from external IRIG-B signal
35 10Mhz signal is used as the 10Mhz reference clock
42 IRIG signal is sent to the IRIG-B module
57 10Mhz output is from the 10Mhz reference clock
58 PHC output PPS is from the PHC clock
59 MAC output PPS is from the Miniature Atomic Clock
62 IRIG output is from the PHC, in IRIG-B format
83 for internal disciplining of the atomic clock.
89 for internal disciplining of the atomic clock.
106 Description: (RW) Specifies the number of seconds from 0-255 that the
118 Description: (RO) Specifies the signal duty cycle as a percentage from 1-99.
164 a percentage from 1-99. Polarity is 1 or 0.
184 Description: (RW) An integer from 0-7 indicating the timecode format
185 of the IRIG-B output signal: B00<n>
208 Description: (RW) These attributes specify the direction of the signal
213 list of signals, prefixed by the input/output direction.
215 The signal direction may be changed (if supported) by
216 prefixing the signal list with either "in:" or "out:".
217 If neither prefix is present, then the direction is unchanged.
230 The 10Mhz reference clock input is currently only valid
241 taken from the UBX-NAV-TIMELS message.
247 ioctl, a system timestamp is made before and after the PHC
248 time is retrieved. The midpoint between the two system
277 port associated with the Miniature Atomic Clock.