Lines Matching +full:clock +full:- +full:generator
18 uses for clock adjustments.
24 IRIG adjustments from external IRIG-B signal
35 10Mhz signal is used as the 10Mhz reference clock
42 IRIG signal is sent to the IRIG-B module
57 10Mhz output is from the 10Mhz reference clock
58 PHC output PPS is from the PHC clock
59 MAC output PPS is from the Miniature Atomic Clock
62 IRIG output is from the PHC, in IRIG-B format
64 GEN1 output is from frequency generator 1
65 GEN2 output is from frequency generator 2
66 GEN3 output is from frequency generator 3
67 GEN4 output is from frequency generator 4
83 for internal disciplining of the atomic clock.
89 for internal disciplining of the atomic clock.
106 Description: (RW) Specifies the number of seconds from 0-255 that the
113 frequency generator <X>.
118 Description: (RO) Specifies the signal duty cycle as a percentage from 1-99.
138 Description: (RO) Either 0 or 1, showing if the signal generator is running.
143 Description: (RO) Shows the time in <sec>.<nsec> that the signal generator
149 Description: (RW) Used to start the signal generator, and summarize
152 The signal generator may be started by writing the signal
161 echo 0 > signal # turn off generator
164 a percentage from 1-99. Polarity is 1 or 0.
184 Description: (RW) An integer from 0-7 indicating the timecode format
185 of the IRIG-B output signal: B00<n>
230 The 10Mhz reference clock input is currently only valid
241 taken from the UBX-NAV-TIMELS message.
277 port associated with the Miniature Atomic Clock.