Lines Matching +full:phase +full:- +full:locked

1 What:		/sys/bus/platform/drivers/zynqmp_fpga_manager/firmware:zynqmp-firmware:pcap/status
9 		https://docs.xilinx.com/v/u/en-US/ug570-ultrascale-configuration
18 		BIT(2)			0: MMCMs/PLLs are not locked
19 					1: MMCMs/PLLs are locked
24 		BIT(4)			0: Start-up sequence has not finished
25 					1: Start-up sequence has finished
27 		BIT(5)			0: All I/Os are placed in High-Z state
30 		BIT(6)			0: Flip-flops and block RAM are write disabled
31 					1: Flip-flops and block RAM are write enabled
54 		BIT(17)			System Monitor over-temperature if set
56 		BIT(18) to BIT(20)	Start-up state machine (0 to 7)
57 					Phase 0 = 000
58 					Phase 1 = 001
59 					Phase 2 = 011
60 					Phase 3 = 010
61 					Phase 4 = 110
62 					Phase 5 = 111
63 					Phase 6 = 101
64 					Phase 7 = 100