Lines Matching +full:no +full:- +full:output

16 		'enabled' means the regulator output is ON and is supplying
17 		power to the system (assuming no error prevents it).
19 		'disabled' means the regulator output is OFF and is not
20 		supplying power to the system (unless some non-Linux
27 		or microamps to determine configured regulator output levels.
34 		regulators which can report that output value.
38 			- off
39 			- on
40 			- error
41 			- fast
42 			- normal
43 			- idle
44 			- standby
52 		"error" indicates an out-of-regulation status such as being
77 		- 'voltage'
78 		- 'current'
79 		- 'unknown'
81 		'voltage' means the regulator output voltage can be controlled
84 		'current' means the regulator output current limit can be
97 		microvolts. This holds the regulator output voltage setting
98 		measured in microvolts (i.e. E-6 Volts), for regulators
102 		output voltage level as this value is the same regardless of
112 		microamps. This holds the regulator output current limit
113 		setting measured in microamps (i.e. E-6 Amps), for regulators
117 		output current level as this value is the same regardless of
132 		- 'fast'
133 		- 'normal'
134 		- 'idle'
135 		- 'standby'
136 		- 'unknown'
141 		output operating mode as this value is the same regardless of
153 		output voltage setting for this domain measured in microvolts,
157 		the power domain has no min microvolts constraint defined by
168 		output voltage setting for this domain measured in microvolts,
172 		the power domain has no max microvolts constraint defined by
183 		output current limit setting for this domain measured in
187 		the power domain has no min microamps constraint defined by
198 		output current limit setting for this domain measured in
202 		the power domain has no max microamps constraint defined by
215 		NOTE: this will be empty if no suitable name is provided
254 		suspend_mem_microvolts. This holds the regulator output
265 		suspend_disk_microvolts. This holds the regulator output
276 		suspend_standby_microvolts. This holds the regulator output
363 		- 'enabled'
364 		- 'disabled'
365 		- 'unknown'
381 		under-voltage fault (1) or not (0).
390 		over-current fault (1) or not (0).
399 		out-of-regulation fault (1) or not (0).
407 		fail.  This indicates if the device reports an output failure
417 		over-temperature fault (1) or not (0).
426 		under-voltage warning (1) or not (0).
435 		over-current warning (1) or not (0).
444 		over-voltage warning (1) or not (0).
453 		over-temperature warning (1) or not (0).