Lines Matching full:charging
61 used for discharging batteries, positive values for charging
101 used for discharging batteries, positive values for charging
136 This is normally used for the charging scenario where
139 user that the temperature is critically high, and charging has
161 This is normally used for the charging scenario where user-space
164 temperature level is high, and charging current has been
178 charging.
195 charging.
212 battery, during charging.
335 Maximum allowable charging current. Used for charge rate
356 Represents a battery percentage level, below which charging will
366 Represents a battery percentage level, above which charging will
380 Select the charging algorithm to use for a battery.
387 than standard charging and may lower its lifespan.
398 when to start and stop charging. Advanced users
401 The charger reduces its charging rate in order to
404 The charger bypasses the charging path around the
418 Reports the charging current value which is used to determine
419 when the battery is considered full and charging should end.
445 Reports the charging current applied during pre-charging phase
472 Represents the charging status of the battery. Normally this
474 used to enable/disable charging to the battery.
479 "Unknown", "Charging", "Discharging",
480 "Not charging", "Full"
486 Represents the charging behaviour.
632 A userspace daemon can monitor the battery charging logic
652 the device will terminate fast-charge mode (charging current
667 the device will terminate fast-charge mode (charging current
680 This entry shows and sets the charging current threshold for
681 entering top-off charging mode. When charging current in fast
683 interrupt and start top-off charging mode.
698 the device will terminate top-off charge mode (charging current