Lines Matching refs:certificate
269 certificate, signature, save_signature:
270 These attributes are used for certificate based authentication. This is
279 Installing a certificate to enable feature::
282 echo "signed certificate" > authentication/Admin/certificate
284 Updating the installed certificate::
287 echo "signed certificate" > authentication/Admin/certificate
289 Removing the installed certificate::
292 echo "" > authentication/Admin/certificate
300 You cannot enable certificate authentication if a supervisor password
302 Clearing the certificate results in no bios-admin authentication method
309 for the certificate installed in the BIOS.
312 Write only attribute used to switch from certificate based authentication
326 It requires configuring an endorsement (kek) and signing certificate (sk).
439 the bytes should correspond to the KEK certificate
441 certificate must be less than or equal to 4095 bytes.