Lines Matching refs:authentication
149 What: /sys/class/firmware-attributes/*/authentication/
156 Devices support various authentication mechanisms which can be exposed
166 Change in any of these two authentication methods will also generate an
171 <attr> authentication is enabled.
175 The type of authentication used.
195 The means of authentication. This attribute is mandatory.
256 Available for HDD and NVMe authentication to set 'user' or 'master'
265 Used with HDD and NVME authentication to set the drive index
270 These attributes are used for certificate based authentication. This is
272 based authentication.
281 echo "supervisor password" > authentication/Admin/current_password
282 echo "signed certificate" > authentication/Admin/certificate
286 echo "signature" > authentication/Admin/signature
287 echo "signed certificate" > authentication/Admin/certificate
291 echo "signature" > authentication/Admin/signature
292 echo "" > authentication/Admin/certificate
296 echo "signature" > authentication/Admin/signature
297 echo "save signature" > authentication/Admin/save_signature
300 You cannot enable certificate authentication if a supervisor password
302 Clearing the certificate results in no bios-admin authentication method
312 Write only attribute used to switch from certificate based authentication
316 echo "signature" > authentication/Admin/signature
317 echo "password" > authentication/Admin/certificate_to_password
350 password management as briefed under authentication section above.
431 What: /sys/class/firmware-attributes/*/authentication/SPM/kek
443 What: /sys/class/firmware-attributes/*/authentication/SPM/sk
454 What: /sys/class/firmware-attributes/*/authentication/SPM/status