Lines Matching full:lpm
97 If CONFIG_PM is set and a USB 2.0 lpm-capable device is plugged
98 in to a xHCI host which support link PM, it will perform a LPM
99 test; if the test is passed and host supports USB2 hardware LPM
100 (xHCI 1.0 feature), USB2 hardware LPM will be enabled for the
103 or disable) indicating whether or not USB2 hardware LPM is
113 If CONFIG_PM is set and a USB 3.0 lpm-capable device is plugged
116 the check is passed and the host supports USB3 hardware LPM,
117 USB3 hardware LPM will be enabled for the device and the USB
121 or not USB3 hardware LPM U1 or U2 is enabled for the device.
223 Some USB3.0 devices are not friendly to USB3 LPM. usb3_lpm_permit
224 attribute allows enabling/disabling usb3 lpm of a port. It takes
275 USB 2.0 devices may support hardware link power management (LPM)
277 tuning the timeout for L1 inactivity timer (LPM timer), e.g.
286 USB 2.0 devices that support hardware link power management (LPM)