Lines Matching full:read

14 Description:    (Read) Defines the size, in 32-bit words, of the local RAM buffer.
15                 The value is read directly from HW register RSZ, 0x004.
21 Description:	(Read) Shows the value held by the TMC status register.  The value
22                 is read directly from HW register STS, 0x00C.
28 Description:	(Read) Shows the value held by the TMC RAM Read Pointer register
29 		that is used to read entries from the Trace RAM over the APB
30 		interface.  The value is read directly from HW register RRP,
37 Description:	(Read) Shows the value held by the TMC RAM Write Pointer register
39 		the CoreSight bus into the Trace RAM. The value is read directly
46 Description:	(Read) Similar to "trigger_cntr" above except that this value is
47 		read directly from HW register TRG, 0x01C.
53 Description:	(Read) Shows the value held by the TMC Control register. The value
54 		is read directly from HW register CTL, 0x020.
60 Description:	(Read) Shows the value held by the TMC Formatter and Flush Status
61 		register.  The value is read directly from HW register FFSR,
68 Description:	(Read) Shows the value held by the TMC Formatter and Flush Control
69 		register.  The value is read directly from HW register FFCR,
76 Description:	(Read) Shows the value held by the TMC Mode register, which
78 		The value is read directly from the MODE register, 0x028.
84 Description:	(Read) Indicates the capabilities of the Coresight TMC.
85 		The value is read directly from the DEVID register, 0xFC8,
99 Description:	(Read) Shows all supported Coresight TMC-ETR buffer modes available