Lines Matching full:feature

34 		- If the device does not support the unload heads feature,
41 		  ATA standard, but support the unload feature nonetheless.
44 		  does support the unload feature, then you can tell the kernel
59 		command queueing) priority support. By default this feature is
61 		priority feature, writing "1" to this file results in an error
72 		(HBA) implementing support for the SATA NCQ priority feature.
74 		support for the SATA NCQ priority feature, regardless of the
75 		device support for this feature (see sas_ncq_prio_supported).
84 		command queueing) priority feature.
94 		(HBA) implementing support for the SATA NCQ priority feature.
96 		support for the SATA NCQ priority feature, regardless of the
97 		device support for this feature.
106 		limits feature found in some ATA and SCSI devices.
115 		feature, write to the file to turn on or off the feature.
116 		By default this feature is turned off.
119 		the feature on the device. Writing "0" disables the feature.